Drawworks
LPG
Cut and Slip
Tubulars
Fuel Systems
100
What are wickers?
What is FRAYED WIRE STRANDS.
100
The weight of LPG is BLANK than BLANK.
What is HEAVIER & AIR.
100
Drilling line life is calculated in BLANK.
What is MEGAJOULES.
100
What is dope?
What is a THREAD COMPOUND.
100
Commercial diesel fuel is either BLANK or BLANK.
What is #1D (WINTER) #2D (SUMMER)
200
Drawworks brakes should be inspected BLANK.
What is ONCE PER SHIFT.
200
At teperatures below -42C, propane changes from a BLANK to BLANK state.
What is VAPOUR & LIQUID.
200
Cut and slip is performed to move the BLANK in the drill line.
What is WEAR POINTS.
200
The BLANK and BLANK are the ends of the drill pipe
What is PIN & BOX.
200
Diesel fuel is injected after the BLANK in the chamber is BLANK.
What is AIR & COMPRESSED.
300
The drawworks BLANK is grooved.
What is DRUM.
300
A propane leak will result in liquid propane BLANK and BLANK in low areas.
What is VAPOURIZING & ACCUMULATING.
300
Cut and slip is usually performed after a certain amount of work. TRUE/FALSE?
What is FALSE.
300
BLANK and BLANK are the most common thread angles.
What is 60/90.
300
Gasoline is available in different octane ratings, check BLANK for the recommended octane rating or a gasoline engine.
What is OPERATORS MANUAL.
400
What are the (4) main components of the drawworks.
What is the DRUM, MAIN BRAKE, TRACTION MOTOR & AUX BRAKES.
400
The BLANK rate of LPG liquid to vapour is approximately BLANK times.
What is EXPANSION & 270.
400
When cutting and slipping, the BLANK must be properly secured.
What is BLOCKS.
400
What (3) factors can extend the life of a new drill string?
What is CLEANING, INSPECTING & PROPER DOPING.
400
On most diesel fuel supply systems, the line between the fuel tank and and the BLANK and then to the injection pump is a low pressure line.
What is TRANSFER PUMP
500
Where do you check the oil level on the drawworks?
What is ON THE OUTSIDE FACE OF THE CHAINCASE.
500
A propane cylinder is a container certified through BLANK,
What is CTC-DOT.
500
The BLANK and BLANK are two sets of blocks on a drlling rig.
What is CROWN & TRAVELLING.
500
Tubulars are the individual components of a BLANK.
What is the DRILL STRING.
500
In cold weather conditions, the cold cylinders BLANK a lot of the heat from the compressing air, making starting much more difficult.
What is ABSORB.
M
e
n
u