Roadway Maintenance Machines (RMM)
Bridge Worker Safety
Railroad Operating Rules
Railroad Safety Rules
Engineering Safe Work
100

Machines must be inspected at these two times.

What are before use and periodically during use?

100

PPE required for Bridge Workers to wear.

What is Head, Foot and Eye/Face Protection?

100

These are prohibited in communication transmissions.

What is false emergency, indecent language, unnecessary communication, or the reveal of information to individuals other than those it is intended for? 

100

Workers must maintain this body contact while climbing

What is three-point contact?

100

This must always be worn when using spike mauls, sledgehammers, picks, or other striking tools.

What is approved eye and face protection?

200

3 Fluids inspected prior to starting work equipment. 

What is Oil, Coolant, Transmission Fluid, Hydraulic, Brake Fluid, or Fuel?

200

Bridge rules apply at this minimum working height above ground.

What is 12 feet 
200

Emergency Radio calls begin with these words.

What is “Emergency, Emergency, Emergency”?

200

Dark Lenses are prohibited under these conditions. 

What is in insufficient lighting? 

200

This tool may only be used for driving railroad spikes and not for striking other tools or rail parts.

What is the spike maul?

300

Workers must not go between standing equipment unless this minimum opening exists.  

What is 50 feet?

300

Bridge worker rules apply when working above water with this minimum depth.

What is 4 feet?

300

Trains need to be secured with these besides air brakes.

What is a number of hand brakes?

300

Footwear required for Railroad Workers.

What are 6-inch lace-up steel-toed footwear?

300

The main tool for pulling spikes.

What is the Claw bar/Spike Puller?

400

Regardless of repair status, a non-compliant machine cannot operate longer than this time period.

What is 30 days?

400

Besides ring buoys, this must be immediately available where life vests are required. 

What is a lifesaving skiff, inflatable boat, or equivalent device?

400

Equipment must not be shoved until this is visually determined

What is that the track segment is clear of equipment, it will stay clear, and switches are properly lined?

400
Precautions that need to be taken when getting on or off equipment.

What is observe for defects, use provided appliances, keep hands free, and face the equipment. 

(RSR 81.4.1 Standing Equipment)

400

The main tool for striking other tools or metal components other than spikes. 

What is the sledgehammer?
500

Hi-Rail vehicles are inspected annually with no more than this many months between inspections. 

What is 14 months?

500

Ring buoys must be placed no more than this distance apart.
 

What is 200 feet?

500

The section that contains hand signals to stop, proceed, or back up a train. 

What is 5.3.1 Hand Signals?

500

These precautions are taken against Slip, Trips, and Falls.

What is avoiding slick surfaces, inclement weather hazards, keep your hands out of pockets, and take short deliberate steps?

(RSR 80.2 Precautions Against Slip, Trips and Falls)

500

Before using striking tools, employees must inspect for these defects.

What are hairline cracks, mushrooming, loose/cracked handles?

M
e
n
u