Measuring
I am used in the workshop to measure short lengths of timber accurately.
Steel Rule
A saw used extensively in woodworking applications with a rigid back ideal for straight accurate cuts.
Tenon Saw
What is the name of the machine that must be switched on and left running whilst using the Disc Sander?
Dust Extractor
What is the name of the tool that is used to strike the back of a chisel.
Mallet
I am used to drive nails below the surface of timber?
Nail Punch
Unit of measurement used within the workshop
Millimetres
A fine toothed saw used for cutting curves.
Coping Saw
Which way does the disc spin on the Disc Sander?
Clockwise
Where should timber be located when using a chisel?
Secured in the vice.
I can be used to fill holes in timber.
Timber Putty
The length of timber stock is measured _____________ .
along the grain
Sawing along the grain is known as __________ timber.
ripping
What side of the table or bench should timber be held when using the Disc Sander?
Right Hand Side
When using the chisel without a mallet where should both hands be?
On the chisel behind the blade.
I am a tool used to pull nails from timber.
Pincers
The width of timber stock is measured _______________ .
across the grain.
Sawing across the grain is known as __________ timber.
Cross cutting
When using the Disc Sander is it OK to hold timber on an angle?
No
The angled part of the chisel leading to the blade is known as?
The bevel
Should a chisel be used to remove nails?
No. Chisels should only be used to remove waste from timber.
What is the first procedure/process to follow when measuring/marking-up timber stock?
Use a Try Sqaure to mark a line across the face of the timber as a starting point.
I am used to hold timber in place whilst using a Tenon Saw.
Bench Hook
What part of the timber stock should be sanded using the Disc Sander?
End Grain
What are chisels designed to do?
Remove waste from timber.
What is the name given to woodworking that involves using joints to join pieces of timber?
Joinery