Simple Machines
Name at least three simple machines.
What is (Pulley, Lever, Wheel & Axle, Inclined Plane, Wedge, Screw)
Define torque and state its unit.
What is rotational force & Nm (or LbIn)
This tool can be used to provide specific lengths to your designs.
What is "Dimension"?
This constraint makes two lines parallel to each other.
What is the "Parallel" constraint?
This movie, a sequel to a popular science fiction franchise, topped the box office charts in 2023.
What is "Avatar 2: The Way of Water"?
A lever has 4m effort arm and 1m load arm. What is the mechanical advantage?
What is MA of 4:1?
Find the torque on a 2m arm with 10 N force.
What is 20Nm?
This tool can create 3D bodies from 2D sketches by stretching a sketch in one or two directions.
What is Extrude?
This constraint ensures that two sketch entities will always touch at a single point.
What is the "Coincident" constraint?
This artist was the most streamed artist on Spotify in 2023.
Who is Taylor Swift?
Explain why a movable pulley reduces the force needed to lift a weight?
What is the rope supports the load at two segments, distributing the weight so only half the input force is needed?
A beam is balanced when clockwise torque equals?
What is counter-clockwise?
This tool requires a profile and a path to create complex 3D shapes by moving the profile along the path?
What is Sweep?
This constraint forces a line or segment to be at a right angle to another.
What is the "Perpendicular" constraint?
This was the number one movie in America in 2023.
What is the Barbie movie.
Calculate the effort force to lift a 200N load using a lever with a 5:1 mechanical advantage?
What is 40N (200 N /5)
Determine the force needed 3m from the pivot to balance a 20 N weight 1m away
What is 6.7N?
This tool is ofetn used to create smooth transitions between multiple profiles that are not co-planar (on the same plane), often used for complex surface modeling.
What is Loft?
This constraint is typically used to align two circles together.
What is "Concentric" constraint.
What is my (Mr. Flores) favorite movie?
What is Dune 2?
A pulley system with a mechanical advantage of 3 is used to lift a 600-pound load. The effort from this pulley system is then applied to a lever, 1 foot from its fulcrum. If the effort is applied at the other end of the lever, 4 feet from the fulcrum, what is the minimum force required to lift the load?
What is 50 lbs?
Explain how moving the pivot point changes the mechanical advantage of a lever.
What is moving the pivot closer to the load increases mechanical advantage (less effort force), moving it closer decreases it? (You can apply less force over longer distances, and vice-versa)
This tool generates 3D parts by rotating a 2D sketch around an axis, commonly used for creating symmetrical objects.
What is Revolve?
This constraint is typically used to make a relation between a line and a circle at exactly one point.
What is "Tangent" constraint.
What does ULTIMATE stand for in ULTIMATE Robotics
What is UNITED LONGHORN TEAM INSPIRING MENTAL ATTITUTEDS TOWARD ENGINEERING.