Part
Pre-Treatment Process
Pre-Treatment Process
OEM Pre Primed Part
Decontaminate, Final Wash, One coat Surface Treatment
Working time for the Urethane
12 minutes
The Technician Shirt
Red Polo
PUR
Polyurethane
Standard Full-Cut
No issues, No scratches, No rust, No bare metal
Clean with glass cleaner, Trim PUR to 1-2mm, Apply Urethane within 2 hours
Carbon Fiber
Decontaminate, Apply Glass Cleaner, Wet scrub With an abrasive Pad, Final Wash, One coat Surface Treatment
MDAT for urethane below 20 Degrees F
30 Minutes
The Trainee Shirt
Grey Trainee Shirt
APEX "ST"
Surface Treatment
Scratches Or Bare Metal <1/2" squared
Clean pinchweld with class cleaner, Trim PUR to 1-2mm, Apply 1 coat Apex Surface Treatment
Colton and Tyler's Favorite Lunch Spot
Chipotle
Surface Treatment Flash off Above and Below 20 Degrees F
2 minutes Above 6 minutes Below
Footwear
Black, Leather, Ankle Support, Slip resistant Boots
MDAT
Minimum drive away time
Repaired or Newly Painted Pinchweld
(After Body Shop)
Scuff specific impacted areas, Clean Pinchweld with Glass Cleaner, Trim Remaining PUR to 1-2mm, Apply 2 coats of Surface Treatment.
Gorilla Glass
Decontaminate, Final Wash, One Coat Surface Treatment
Shelf life for the Metal Cleaner Prep Stick
No shelf Life
Approved Belt
Black, Leather, Buckless belt
FMVSS
Federal Motor Vehicle Safety Standard
FRP (Fiber Reinforced Plastic)
Scuff specific impacted areas, Clean with Glass Cleaner, Trim remaining PUR to 1-2mm, Apply 1 Coat of Surface Treatment
Polycarbonate
Decontaminate, Scuff with 100 Grit Sandpaper, Final wash, One Coat Surface treatment
Air Temperature for Apex Urethane
0 to no upper limit
Protects your shirt from "Rookie Stripes"
Safelite Apron
ANSI/"AGRSS" 004-2018
Auto Glass Replacement Safety Standard
Corrosion < 24" squared
Achieve bright Shiny metal, Clean Pinchweld with Glass Cleaner, Trim remaining PUR to 1-2 mm, Metal Cleaner Prep Stick, Wipe with water, Apply two coats of Surfae Treatment.