PPE
Knowledge
Stairs/Ladder
Don't Die
Random
Fire Protection & Prevention
Surprise
100
The ____________ must pay for PPE.
Employer
100
How often do scaffolds need to be inspected?
Daily
100
The ______ _______ steps of a ladder are restricted from being utilized.
Top Two?
100
A confined space is defined as a space large enough for entry, limited means of egress, and a space ___________________.
"Not intended for continuous occupancy?
100
The item that states a chemical, health hazards associated with that chemical, the PPE requirement when handling a chemical and has pictograms is called a ____________.
Safety Data Sheet?
100
This employee may initial the monthly inspection of any fire extinguisher.
Any trained employee
/operator
100
What does JSA stand for?
Job Safety Analysis.
200
___________ is the first step in the hierarchy of controls, while ___________ is the last.
Elimination and PPE
200
At what depth must you provide access and egress from the trench?
4
200
A straight ladder must extended _______ feet above the landing.
3 feet?
200
True or False
Mushroom caps are an acceptable form of protection from rebar impalement.
False
Mushroom caps are not allowed.
200
This is the only power tool used by CWC that requires a Hot Work permit.
Grinder
200
Fire extinguishers are required every ________ sqft, and no more than ________ feet travel distance.
3,000 and 75?
200
ColonialWebb's best practice is to use a ________ instead of a ladder when working at height above six feet.
Lift?
300
This is how often PPE should be inspected!
Before Each Use
300
I will follow proper _________ procedures whenever servicing or maintaining machines or systems in which the unexpected energization, start-up or release of stored energy could cause injury.
Lockout/Tagout
300
Ladders should be set up with a ______ to ______ ratio.
4 to 1
300
The acceptable oxygen level is between _____________.
19.5% and 23.5%?
300
What's wrong with this Ladder?
What's wrong with this Ladder?
Missing Ladder Labels
300
______________ is not allowed on any construction site and immediate dismissal from the site is required if found.
Controlled Substance
300
At what depth are you required to start shoring, sloping, benching, or have a trench box?
5 Feet deep
400
This is the height at which fall protection is required in the construction industry.
6 feet
400
What does GFCI stand for?
Ground-Fault Circuit Interrupters
400
Handrails are needed on stairwells when there are ___ or more risers.
4?
400
This is where you would find the correct blade/wheel size of a power tool.
Manufacturer’s Tag / Manuel
400
What is missing? 
The KEY
400
After “Tagging” a bad fire extinguisher out of service, what must you do?
Remove it from site
400
Top rails must withstand ___ pounds of downward and outward force?
200
500
This is the ANSI cut level that all gloves must meet according to CWC.
Cut level 4
500
What does a yellow tag on a scaffold mean?
Yellow means use caution and you must wear fall protection while on the scaffold.
500
The ____________ must be opened and locked on a step ladder.
Spreader bar
500
This device is required at both the regulator and the torch of all rigs to prevent flame from entering the hose or the cylinder.
Flash(back) Arrestor
500
I will not bodily enter one of these without first contacting safety personnel. I will not enter THIS unless I have been properly trained and have the proper equipment.
Confined Space
500
True or False
It is prohibited for portable space heaters to be used at construction site for human comfort.
True
500
This is the amount of weight a hole cover must be able to support?
2 times the working load
600
True or False
A body belt is a form of fall protection.
False.
A body belt is a positioning device and must be used with PFAS.
600
All sites must have a _____________ Plan.
Site Safety?
600
Handrails must be free of ___________.
Defects and puncture hazards.
600
Compressed gases are considered stored properly when the regulator is removed and ____________ are placed on.
Caps?
600
Guardrails are often used by employers to protect workers from falls. How high must the top guardrail (the top rail) be above the working surface
42 inches, plus or minus 3 inches
600
This employee is implemented to ensure the fire-safety of a building or situation that may pose an increased risk to persons or property.
Fire Watch
600
Cranes must stay _____ feet away from power lines.
20 feet?
700
Class E hardhats can resist 2,200 volts of electricity.
True or False
True
700
Before the operation of any equipment including scissor lifts, THIS must be completed.
Equipment Inspection
700
Stair pans must have ________ material before they are used to avoid tripping hazards.
Filler?
700
Three elements needed to cause a fire are ____________, _______ & _________.
Heat, oxygen, and fuel?
700
True or False
You can use a metal ladder around power lines or exposed energized electrical equipment?
False, you should NEVER use a metal ladder in this circumstance
700
This acronym is commonly used to remind employees how to use a fire extinguisher.
P.A.S.S.
700
This is the evacuation alarm on most “new” construction sites.
3 Air Horn Blast 
800
Prior to wearing a respirator a worker must have __________.
FIT test
800
What does the double square symbol represent? 
Double insulated
800
Staircase landings must have a __________ around the open edge.
A guardrail system?
800
___________ are the number one hazards of excavation.
Cave-ins?
800
Which term describes a tool that is powered by compressed air?
Pneumatic tools
800
This symbol refers to this type of fire.
Flammable Liquids
800
Can you use another employee's lock or tag for LOTO?
No
900
Anchor points must withstand ______ pounds?
5,000
900
The working deck on a scaffold must be fully __________.
Planked?
900
Ladders are required when an excavation is ____ feet deep and every ________ lateral feet.
4 and 25 feet?
900
The three roles played in a confined space operation are the ____,___, and _________.
Attendant, Entrant, and Entry Supervisor?
900
How old do you have to be to operate a forklift, regardless of training?
18 years old
900
Oxygen cylinders in storage shall be separated from fuel-gas cylinders or combustible materials , a minimum distance of ______feet
20 feet or by a noncombustible barrier at least 5 feet high having a fire-resistance rating of at least one-half hour. nd/or separated by a 5-foot fire rated wall.
900
What is the permissible exposure limit (PEL) for noise in an 8-hour day?
90 dBA
1000
When using a tool overhead, THIS type of PPE is required.
Face Shield
1000
Scaffolds can only be erected, moved, dismantled or altered under the supervision of a ____________?
Competent person
1000
This is the height at which fall protection is required on a ladder with CWC.
10 Feet
1000
What is missing from this tool?
The Handle
1000
What is the minimum distance that excavation materials, tools, and other supplies be kept back from the excavation’s edge?
2 feet
1000
This document is required when a source of ignition or flammable material is present or can be a fire hazard regardless of the presence of flammable material in the workplace. Common processes are:
welding, soldering, cutting and brazing.
Hot Work Permit
1000
What is an Excavation?
A man-made cut, cavity, trench, or depression formed by earth removal.