PPE
Knowledge
Stairs/Ladder
Random
Fire Protection & Prevention
Surprise
100

What is the rating for safety glasses?

ANSI Z87

100

How often do scaffolds need to be inspected? 

Daily

100

The ______  _______ steps of a ladder are restricted from being utilized.

Top Two?

100

The item that states a chemical, health hazards associated with that chemical, the PPE requirement when handling a chemical and has pictograms is called a ____________.

Safety Data Sheet?

100

This employee may initial the monthly inspection of any fire extinguisher.

Any trained employee/operator

100

When was Hensel Phelps founded?

1937

200

___________ is the first step in the hierarchy of controls, while ___________ is the last.

Elimination and PPE

200

At what depth must you provide access and egress from the trench? 

4ft

200

A straight ladder must extended _______ feet above the landing.

3 feet?

200

What college did Rick Tucker attend in Colorado?

CSU

200

When performing hot work, a fire extinguisher dedicated to that operation must be within ____ feet

30 feet

200

What's the name of the Hensel Phelps wine?

Joseph Phelps

300

This is how often PPE should be inspected!

Before Each Use

300

I will follow proper _________ procedures whenever servicing or maintaining machines or systems in which the unexpected energization, start-up or release of stored energy could cause injury.

Lockout/Tagout

300

Ladders should be set up with a ______ to ______ ratio. 

4 to 1

300

What does EMR stand for in Safety?

Experience Modification Rate

300

Keep open flame, hot work and other heat sources at least ____ feet away from flammable and combustible liquids

50 feet

300

At what depth are you required to start shoring, sloping, benching, or have a trench box? 

5 Feet deep

400

This is the height at which fall protection is required in the construction industry.

6 feet

400

What does GFCI stand for? 

Ground-Fault Circuit Interrupters

400

Handrails are needed on stairwells when there are ___ or more risers.

4?

400

What does DEIc stand for?

Diversity, Equity, Inclusion and community

400

After “Tagging” a bad fire extinguisher out of service, what must you do?

Remove it from site

400

What is Brennan Ruf's middle name? Hint: Starts with a K

Kelly

500

This is the ANSI cut level that all gloves must meet according to CWC.

Cut level 4

500

What does a yellow tag on a scaffold mean?

Yellow means use caution and you must wear fall protection while on the scaffold.

500

For ladders ____ feet or more in length, two people are required to carry and move the ladder

12 feet

500

What is David Saurini's go to cigarette brand?

American Spirits

500

True or False


It is prohibited for portable space heaters to be used at construction site for human comfort.



True

500

Who was Dan Menze's college ski team captain?

Hint: They are a HP PS here at DEN

Bob Mantz

600

True or False

A body belt is a form of fall protection.



False.

A body belt is a positioning device and must be used with PFAS.

600

Name the 3 energy sources from the energy wheel and hazard recognition.

Chemical, Temperature, Gravity, Motion, Mechanical, Electrical, Pressure

600

Handrails must be free of ______ and _____.

 Defects and puncture hazards.

600

What's the origin of Andrew's last name "Ksiazek"?

a) Polish b)Czech c)Slovakian

Polish

600

This employee is implemented to ensure the fire-safety of a building or situation that may pose an increased risk to persons or property.

Fire Watch

600
At what age did Bobby Westphal become a published author?

11 years old


700

Class E hardhats can resist 2,200 volts of electricity.

True or False

True

700

Pins and whip checks are required on all connections of air lines greater than a ____ inch in diameter.

a) 1/4" b) 1/2" c) 3/4"

b) 1/2"

700

True or false

Using the top 3 steps of an extension ladder is acceptable

false

700

What year did ownership of Hensel Phelps transfer to its employees?

1989

700

This acronym is commonly used to remind employees how to use a fire extinguisher.

 P.A.S.S.

700

Spell Clayton's last name

Kurkechian

800

What type of foot protection is required when operating a jumping jack, tampers, jack hammers, walk-behind rollers, and other operations where the top of the foot may be injured

metatarsal guards with work boots

800

What is the permissible exposure limit (PEL) for noise in an 8-hour day?

90db

800

Staircase landings must have a __________ around the open edge. 

A guardrail system?

800

What year did Mike Choutka join Hensel Phelps?

1991

800

Name 2 of 5 types of fire extinguishers classes

Flammable Liquids

800

Provide 3 out of 5 Hensel Phelps values

Ownership, Integrity, Builder, Diversity and Community

900

Anchor points must withstand ______ pounds?

5,000

900

Cranes must stay away _____ feet away from power lines

20 ft

900

Ladders are required when an excavation is ____ feet deep and every ________ lateral feet.

4 and 25 feet?

900

In what region did Derek Hoffine start his career?

Southeast Region

900

Oxygen cylinders in storage shall be separated from fuel-gas cylinders or combustible materials , a minimum distance of ______feet

20 feet or by a noncombustible barrier at least 5 feet high having a fire-resistance rating of at least one-half hour. nd/or separated by a 5-foot fire rated wall.

900

What is the permissible exposure limit (PEL) for noise in an 8-hour day?

90 dBA

1000

Name 3 examples a face shield in conjunction with eye protection is required:

1. working with acids or hazardous liquids

2. performing grinding operations

3. chipping concrete

4. hoseman, nozzleman, and vibrator operations are placing concrete

5. using a chainsaw

1000

Respirators should only be used when engineering controls do not effectively control the hazard to an acceptable level. Only use a respirator that has NIOSH approval. What does NIOSH stand for?

National Institute for Occupational Safety & Health

1000

Landing platforms may be required when it is required to ascend heights more than ____ feet

20 Feet

1000

Name 4 out of the 6 presidents of Hensel Phelps.

Mike Choutka, Jeff Wenaas, Jerry Morgensen, Robert Tointon, Joseph Phelps, Abel Hensel Phelps.

1000

For welding operation what shade number should be used for Heavy cutting?

Hint: shade numbers are 1-10

#4 or #5

1000

What are the four pillars of Hensel Phelps Way?

People, Process, Partnership and Technology

M
e
n
u