At what height is fall protection required in construction?
What is 6 feet (OSHA 1926.501(b)(1))
100
Is it OK to use a cord with a missing ground prong?
What is NO. Remove it from service (OSHA 1926.404(f)(6), 1926.416(e))
100
True or False: Cross braces are an acceptable way to climb a scaffold.
What is FALSE. Cross braces shall not be used as a means of access (OSHA 1926.451(e)(1))
100
True or False: A welding hood can take the place of a hard hat during welding.
What is FALSE. The hood is worn over an approved hard hat (HVC Safety Manual; OSHA 1926.100(a))
100
True or False: All rigging must be inspected before each use.
What is TRUE. Inspect before use on each shift (OSHA 1926.251(a)(6))
200
What is the top rail height of a guardrail system?
What is 42 inches +/- 3 inches (OSHA 1926.502(b)(1))
200
Is GFCI protection required on all temporary 120V outlets?
What is YES (HVC Safety Manual; OSHA 1926.404(b)(1))
200
What does a yellow tag on a scaffold mean?
What is personal fall arrest protection is required (HVC Safety Manual)
200
Safety glasses must meet ANSI Z___.1 and have side shields.
What is Z87.1 (OSHA 1926.102(b)(1))
200
Who can give a crane operator an emergency stop signal?
What is ANYONE. The operator must obey a stop signal no matter who gives it (OSHA 1926.1417(y))
300
How much force must the top rail of a guardrail system withstand?
What is 200 lbs in an outward or downward direction (OSHA 1926.502(b)(3))
300
Who is allowed to remove a lockout lock?
What is only the person who put it on (OSHA 1910.147(e)(3); HVC Safety Manual)
300
At what height are guardrails required on a scaffold?
What is over 10 feet (OSHA 1926.451(g)(1))
300
Shirts must cover the shoulder and have a minimum ___ inch sleeve.
What is 4 inches (HVC Safety Manual)
300
What device prevents the headache ball, load hook, or sheave from two-blocking against the boom tip?
What is an anti-two-block device (OSHA 1926.1416(d)(3))
400
An open hole ___ or greater must be covered, and the cover must be marked ___.
What is 2 inches; marked "HOLE" or "COVER" (OSHA 1926.500(b), 1926.502(i)(4))
400
Temporary lighting should be installed on a ___ circuit from other electrical tools and equipment.
What is separate and labeled (NEC 590.4(D); HVC Safety Manual)
400
Scaffold planks 10 feet or shorter cannot extend more than ___ past the end support.
What is 12 inches (18 inches for planks over 10 feet) (OSHA 1926.451(b)(5))
400
Hard hats should be replaced every ___ years.
What is 5 years (HVC Safety Manual; follow manufacturer date)
400
What is the minimum distance a crane must keep from power lines 50 kV or less?
What is 20 feet (OSHA 1926.1408, Table A)
500
How far from the roof edge must warning lines be placed?
What is 15 feet (HVC Safety Manual). OSHA minimum for roofing work is 6 feet, or 10 feet where mechanical equipment runs toward the edge (OSHA 1926.502(f)(1))
500
How much clear working space is required in front of an electrical panel (up to 150 volts)?
What is 3 feet (OSHA 1926.403(i)(1)(i))
500
A scaffold must support its own weight plus ___ times the maximum intended load.
What is 4 times (OSHA 1926.451(a)(1))
500
Name 5 required PPE items on Hy-Vee Construction jobsites.
What is hard hat, safety glasses, hard-soled work boots, long pants, sleeved shirt, high-visibility shirt or vest (HVC Safety Manual)
500
What 4 conditions make a lift a critical lift?
What is 1) two or more cranes, 2) lifts near power lines, 3) specialized or complex rigging, 4) lifts over 75% of crane capacity (HVC Safety Manual)