PPE
This part of a glove protects you from impact injuries.
What is the padding on the back of the glove
The short way to say Lock Out Tag Out.
What is LOTO?
The hazard associated with cords across walk-ways, tools on catwalks, uneven surfaces.
What is slip, Trip and Fall Hazards?
The requirement for wearing gloves.
100% of the time.
The requirement before using:
Cranes, hoist, fall protection, ladders, hand tools and mobile equipment.
What is daily or pre-use inspections?
This type of sleeve is required when changing saw blades, handling sharp knives, anvils, chipping heads etc.
What are cut sleeves?
This is used when multiple people are working on one LOTO and everyone places their lock on it.
What is a group lock box?
This is required when putting a chemical, gas hydraulic fluid or diesel in a water bottle.
What is labeling?
A frequent quality reason lumber dries unevenly in the kiln's.
What is improper stick placement?
The are employee's assemble when there is an emergency according to the emergency action plan.
What are muster points or assembly points?
Where are they???
These 2 types of PPE are required when flying particles or dust are present.
What are safety glasses and face shields?
Entering this zone requires LOTO.
What is the hazard zone?
The term for when the largest number of hazards result in an injury.
DAILY DOUBLE!!!!!!!!!!!!!!!
What are the 3 D's?
Dumb
Dangerous
Different
When you have to report an injury no matter how big or small.
What is immediately?
These are the 3 things you can do when there is an active shooter on the grounds.
What is RUN, HIDE or FIGHT?
A flammable liquid must be stored in a flammable cabinet...
When not in use (end of shift, if not used through shift).
True or False. If a cross-up or jam cannot be requires lifting chains reaching into or maximum effort is required a millwright must lock out and remove the jam.
True. This is known as Zone 3,4 & 5 LOTO
The hazard related to working 4' above the ground or 4' below.
What is working at heights?
The biggest "pet peeve" of the BIG BOSS.
What is housekeeping?
Not acceptable means of repairs electrical cords.
What is electrical tape?
Wearing this will not protect you from all hazards.
PPE! This is your last line of defense.
When a machine has to be on for belt or chain adjustments or troubleshooting.
What is a partial energy lock out.
The term for a hazard that causes injury due to becoming comfortable with dangers and not being cautious anymore.
What is complacency?
One of the criteria that makes you eligible for employee of the month.
What is turning in a near miss or hazard form?
This area does not allow ANY pedestrian traffic UNLESS you work in it.
What is the kilns, shipping and through the dry storage warehouse?