PPE
Employees
Where can you find DWTs Energy Isolation policy?
SharePoint -> EHS Manual
Only "blank" person is allowed on the ladder cable at any given time
One
Employees shalls not attempt to lift more than "blank" without assistance from another employee or use of mechanical aids
50lbs
Employees shall wear their eye protection to adequately protect themselves from "what" in the work area
Hazards
This is an employee whose job requires him/her to operate or use a machine or equipment on which servicing or maintenance is being performed under LOTO or whose job requires him/her to work in an area in which such servicing or maintenance is being performed
Affected Employee
When climbing all employees shall maintain "Blank" . Always having a stable footing or grip. Unless utilizing a work positioning lanyard
3 points of contact
An activity within a hazardous area which (1) could potentially produce a spark, (2) involve a hot surface or heating surface, or (3) involve an open flame
Hot Work
An approach limit at a distance from an exposed energized electrical conductor or circuit within which a shock hazard (electrocution) exists.
Limited approach boundary
"what" shall be worn in work areas where there is a potential for injury to the head from falling or flying objects
Hard Hats
A person trained on or knowledgeable in the recognition of applicable hazardous energy sources, the type and magnitude of energy sources in their area and the methods necessary for energy isolation and control and who LOTOs machines or equipment in order to perform servicing or maintenance
Authorized Employee
PFAS stands for what?
Personal Fall Arrest System
These are symptoms of what cold related injury/stress - Shivering, confusion and loss of muscular control can occur. Poor performance; irrational decisions, not mentally alert. Can progress to a life threatening condition where shivering stops, the person loses consciousness and cardiac arrest may occur
Hypothermia
An approach limit at a distance from an exposed energized electrical conductor or circuit part within which there is an increased risk of shock, due to electrical arc over combined with inadvertent movement, for personnel working in close proximity to the energized electrical conductor or circuit part
Restricted approach boundary
Any defects or concerns regarding PPE should be brought to their "what"?
Immediate supervisor
A mechanical device that physically prevents the transmission or release of energy, such as a manually operated circuit breaker, a disconnect switch or a valve
Energy Isolating device
Fall protection equipment and personal fall arrest equipment must be inspected by the user when?
Before each use
What hand signal does waving both arms back and forth horizontally mean
Stop everything
One who has skills training and knowledge related to the construction, specific work method and operation of the electrical equipment and installations and has received safety training to recognized and avoid the hazards involved
Qualified Electrical worker
All PPE issued to employees shall meet "Blank/Blank/Blank/Blank" Standards
OSHA/NIOSH/ANSI/NFPA
Blank or Blank energy (such as that in capacitors, springs, elevated components, rotating flywheels, hydraulic systems, compressed gas or water must be dissipated or restrained by methods such as grounding, repositioning, blocking, bleeding down.
Stored or residual
In our SRK-11 we have a MCD. What does MCD stand for?
Military compact descender
According to DWT policy, after 18 hours on duty. How many hours of time off are you required?
10 hrs
a type of worker that is not trained or knowledgeable in the work and must work under the direct supervision of a Qualified Electrical Worker
Unqualified Worker