Heat Related Safety
Where would you document the expected temperature for that day?
JHA
The recommended angle for a ladder to ensure proper stability.
75 Degrees.
What is the purpose of trauma straps?
Allows the worker, who is suspended, to stand up in their harness and to relieve the pressure being applied to the arteries and veins around the top of the legs
True or False: If a blade is dull, it is acceptable to use the utility knife without gloves.
False. Always wear cut-resistant gloves prior to using a utility knife or handling any sharp objects.
True or False. While working within 5 feet an overhead service drops do not require a insulated mat.
False. While inside 10 ft. of a service drop, an insulated mat is required.
When the heat index or ambient temperature reaches ___/___ or above all efforts should be made to modify or control employee's heat exposure. *will accept Fahrenheit or Celsius.
115 degrees or Fahrenheit or 42 degrees Celsius
Two key points to remember when ascending and descending a ladder.
1. Maintain three points of contact.
2. Keep your body within the center of the ladder.
True or False? A properly fitted harness is when:
True! All three are correct.
When using a blade to open a box, the correct way to cut is...
A) Away from the body.
B) Toward the body.
C) With a lot of pressure.
D) With a quick flick of the wrist.
A) Away from the body.
Daisy Chain.
It can lead to overloaded circuits and fire risk.
When the temperature equals 95 degrees Fahrenheit or when the heat index reaches any number colored in light orange or red ___ is required to be filled out.
Hydration Log
True or False. It is okay to use a metal ladder when working in close proximity to electricity.
False. Never use a metal ladder when working near electricity. A fiber glass ladder should be utilized.
You are painting conduit from a ladder 6 feet above the ground. There are installers working on the roof above. What PPE do you need in order to establish safe work conditions?
Full body harness, tied off to anchor and rope, hard hat, gloves, and safety glasses..
Yes or No: Is it safe to hand your co-worker a utility knife with the blade pointed toward their hand?
No, never hand a utility knife with the blade pointed at someone's hand. Instead, hand the knife so the receiver grabs it by the handle and always wear gloves.
An electrical safety device that senses small imbalances in the circuit caused by current leakage to ground, and in a fraction of a second, shuts off the electricity.
GFI/GFCI - Ground Fault Circuit Interrupter
Name 2 ways lone workers can avoid risk of high heat exposure.
Re schedule the work and request a 2nd person
True or False. It is acceptable to exceed a ladder's weight limit by a few pounds.
False. Never exceed a ladder's weight limit. A fall resulting in serious bodily injury can occur.
When work is complete, and all workers have left the roof, the ____________ removes lifelines and anchors, making sure to properly flash all penetrations.
Last Man Down/Last Person Down
When selecting a utility knife, it's best to use one with a ________ blade.
Retractable.
What is LOTO and why is it important?
Lockout Tagout. Ensures dangerous equipment is dangerous de energized and cannot re-energize unexpectedly