ELEVATED WORK AREAS
A non-flammable canvas, or other similar material, and barricades shall be used to prevent _____________ from falling on lower levels.
What is welding or cutting slag
Power tools shall be _______________ while repairs are being made or attachments are being installed or removed.
What is: disconnected from the power source
Once work is completed, who authorizes the removal of Danger Tags per the Fossil Tagging Clearance Record?
Who is the: Control Authority
What type of material is "Type A" fire extinguisher used for?
What is paper and wood. Anything that burns and leaves ashes. A is for ashes.
In March 19__ Stone & Webster began construction of Louisiana Steam Products Company on 27 acres along the Mississippi River north of Baton Rouge.
What is: 1928
Toe-boards shall be used in all elevated work areas _______ feet high if there is a danger of tools or materials falling off.
What is 10 feet high.
The only tools permitted for cutting tie wraps, cable ties, wire ties, etc. are ___________________?
What is : hinged-type cutters similar to cutting pliers
True or False - Contractor Identification Tags (CIT) shall be removed at the end of an Affected Persons daily work period.
What is : True
What type of fire is a "C Type" fire extinguisher used for?
What is electrical.
In 1953 1A, 2A, and 3A boilers were installed along with _____ and STG’s. This represented a further leap in technology as these boilers and turbines operated at 1500psi.
What is: 2A and 3A STG’s
A safety harness with lifeline attached shall be worn while performing work from the turbine runner blades when __________ are not used.
What is a scaffold.
A powder-actuated tool should not function until it is pressed or pushed against the work surface with a minimum force of _____ greater than the total weight of the tool.
What is: (B)5 pounds.
Where do contractors place Contractor Identification Tags (CIT)?
What is: On the Contractor Board under the applicable hasp
What are the 3 things that make up the "Fire Triangle". The 3 things you need for a fire to occur.
What is Heat, Fuel, and oxygen.
In 2005 Hurricane Katrina roared into the area. As the rest of the Entergy system went offline Louisiana Station had no alternative but to follow suit. As a result of the shutdown a feature that was included in 4A CTG control system but never activated was upgraded to combat a reoccurrence. This feature was known as the _________ mode. The _________ mode allows the unit to hold its own frequency. The upgrade had been tested but never implemented prior to this time.
What is: isochronous mode