LADDER SAFETY
You should always do this when ascending or descending a ladder.
A.WHAT IS FACING THE LADDER?
B.WHAT IS SKIP RUNGS TO GO FASTER?
C.WHAT IS CARRY TOOLS IN YOUR HANDS FOR SAFETY?
This procedure protects employees from machine and equipment capable of causing injury due to unexpected energization, release of stored energy, or start-up.
A.WHAT IS THE LOCO-MOCO PROCEDURE?
B.WHAT IS THE LOCK OUT/TAG OUT (LOTO) PROCEDURE?
C.WHAT IS THE STAY AWAY PROCEDURE?
Slings in inventory with damage should be _______ and _______.
A.WHAT IS USED AND REPLACED?
B.WHAT IS TAGGED AND REMOVED?
C.WHAT IS USED AND TAGGED?
The number of rungs from the top that you should never stand on.
A.WHAT IS THE TOP RUNG?
B.WHAT ARE THE TOP THREE RUNGS?
C.WHAT ARE THE TOP TWO RUNGS?
Placing a padlock on an energy-isolating device to prevent accidental release of energy is called this.
A.WHAT IS A LOCKDOWN?
B.WHAT IS A LOCK-IN?
C.WHAT IS A LOCK OUT?
This piece of equipment is used to hoist heavy, bulky, or delicate loads.
A.WHAT IS A HALLOWEEN COSTUME?
B.WHAT IS A DOG HARNESS?
C.WHAT IS A SAFETY SLING?
This item is required for carrying tools to keep both hands free for climbing.
A.WHAT IS A TOOL BELT?
B.WHAT IS A PURSE?
C.WHAT IS A HOOK?
Placing a tag or label on an energy-isolating device indicating that it cannot be operated until removed.
A.WHAT IS A TAG OUT?
B.WHAT IS A TAG-ON?
C.WHAT IS DISABLED?
What to consider when choosing the correct sling.
A.WHAT IS SIZE, WEIGHT, SHAPE AND SENSITIVITY OF THE MATERIAL TO BE LIFTED?
B.WHAT IS SIZE, WEIGHT, AND COLOR?
C.WHAT IS WEIGHT AND TYPE OF MATERIAL?
Falls from ladders usually result in these types of injuries.
A.WHAT ARE FEELINGS OF EMBARRASSMENT?
B.WHAT ARE SERIOUS INJURIES AND/OR DEATH?
C.WHAT ARE MENTAL INJURIES?
Generated and static are types of this hazardous energy source found in the workplace.
A.WHAT IS POTENTIAL ENERGY (PRESSURE)?
B.WHAT IS MECHANICAL ENERGY?
C.WHAT IS ELECTRICAL ENERGY?
The term for the amount of weight a sling is rated to handle.
A.WHAT IS LOAD?
B.WHAT IS DEPTH?
C.WHAT IS CAPACITY?
What an employee should do before each use of a ladder.
A.WHAT IS NOTHING IS REQUIRED?
B.WHAT IS COMPLETE A LADDER INSPECTION?
C.WHAT IS PUT THE LADDER AWAY, AND TRY AGAIN LATER?
Injuries can be caused by the failure to disconnect equipment/machines from this.
A.WHAT IS THE POWER SOURCE?
B.WHAT IS LOTO SYSTEM?
C.WHAT IS THE HYDRAULIC PRESS?
What is proper storage for maintaining your slings?
A.WHAT IS HANGING UP AND KEEPING AWAY FROM WEATHER EXPOSURE?
B.WHAT IS LEAVING IT ON THE GROUND IN A BALL?
C.WHAT IS HANGING IT UP IN OUTSIDE CONDITIONS?