General Safety
What must be provided when a worker is exposed to a fall of more than 3 metres?
What is a harness?
Section 26 of Ontario Regulation 851 requires that this must be shielded if it could endanger a worker—What is corrective action?especially when it is being ejected or discharged from a machine.
What is material, article, or waste?
What must be included in an electrical safety program besides procedures and PPE?
What is training?
This person must remain outside the confined space and be in constant communication with the worker inside, ready to initiate emergency procedures if needed.
Who is the attendant?
What is the name of Ontario’s legal framework for workplace health and safety?
What is the Occupational Health and Safety Act (OHSA)?
What must be done before using auxiliary equipment attachments?
What is an inspection?
This type of device, whether mechanical or electrical, is used to prevent access to hazardous machine parts while the machine is operating.
What is an interlocking safeguarding device?
What is the primary method of hazardous energy control?
What is lockout?
What document outlines hazards, rescue procedures, and PPE for confined spaces?
What is a confined space plan?
What is the purpose of a Joint Health and Safety Committee (JHSC)?
What is joint employee and management participation in health and safety?
What are the two components of training for material handling equipment?
What are theory and practical?
This section of Ontario Regulation 851 requires that any machine with exposed moving parts that may endanger a worker must be equipped with a guard or device to prevent access.
What is Section 24 of Regulation 851?
What assessment is required to evaluate electrical hazards?
What is an arc flash assessment?
When must a confined space plan be reviewed?
What is annually or when hazards or work change?
In Ontario, what system emphasizes that everyone in the workplace shares responsibility for health and safety?
What is the Internal Responsibility System (IRS)?
What must be provided to a worker exposed to excessive heat?
What is ventilation or cooling?
What must be completed and maintained before operating any new or modified machine, process, or equipment?
What is a safety review or hazard/risk assessment?
This Canadian standard outlines procedures for controlling hazardous energy during maintenance or servicing of machinery, including the use of lockout devices and energy control procedures.
What is CSA Z460: Control of Hazardous Energy – Lockout and Other Methods?
What must be done when a worker is required to enter a tank or similar confined space?
What is test the atmosphere and follow entry procedures?
To be certified, a JHSC member in Ontario must complete this type of training approved by the Chief Prevention Officer.
What is JHSC Certification Training (Part 1 and Part 2)?
What must be done when a worker is exposed to a risk of fire or explosion?
What is implement fire prevention and emergency procedures?
What should a machine and equipment inventory include?
What are equipment identifiers, schematics, serial numbers, and inspection records?
What equipment is required for electrical troubleshooting and diagnostics?
What are voltage verification tools?
What must be included in a confined space program besides plans and permits?
What are atmospheric testing, signage, emergency response, and training?
This is the minimum number of workers a workplace must regularly employ before a Joint Health and Safety Committee is legally required.
What is 20 workers?