These should be removed only by the person who installed them.
What are Locks and Tags?
100
Within the GHS, there are three hazard classifications that a chemical may fall under.
What are physical, health, and environmental?
100
The word that is identified by the second "P" in PPE.
What is "Protective"?
100
The device provided to protect operators and other associates from hazards associated with machines and equipment performing work.
What is Machine Guarding?
100
A space big enough for human entry and to perform work with limited openings for entry and exit and not intended for continuous occupancy.
What is a Confined Space
200
This person can attach Lockout/Tagout devices.
What is an authorized employee?
200
There are two methods for communicating a chemical’s hazards that the GHS standardizes.
What are Labels and Safety Data Sheets?
200
The PPE that is required in all areas of the shop floor.
What are Safety Glasses?
200
In-running nip point, crushing, shearing, pinch point, optical, noise, temperature, projectile, transversing, reciprocating, puncture, and electrical shock are all types of ____________ ___________.
What are Machine Hazards?
200
A confined space with a hazardous atmosphere, a material that might engulf the entrant, an internal structure that could trap an entrant, or any other safety or health hazard.
What is a Permit Required Confined Space
300
Used to protect employees from the unexpected startup or the release of stored energy during the servicing of equipment.
What are Lock Out/Tag Out Procedures?
300
To make it easier to determine a chemical’s hazards, the GHS standardizes these three key label components.
What are Pictograms, Signal Words, and Hazard Statements?
300
Types of this PPE can be made of materials like cotton, nitrile, latex, and vinyl.
What are gloves?
300
When determining if a guard is adequate it is important to to remember this acronym.
What is A.U.T.O.?
300
This Shiloh group has received special training for Confined Spaces and is authorized to enter them.
What is Maintenance Group?
400
Devices that must be used in any area where water may come into contact with electrical products. Examples - Unfinished basements - Bathrooms - Kitchens - Garages - Outside outlets.
What are Ground Fault Circuit Interrupters?
400
On GHS labels, there are two signal words that may be used to indicate a hazard’s relative level of severity.
What are Danger and Warning?
400
Type of PPE that is worn on the face to protect the eyes from liquid splashes.
What are Goggles? // What is a Face Shield?
400
The acronym A.U.T.O. is very significant when evaluating the effectiveness of machine guarding as it must prevent any portion of the body from going here.
What is Around, Under, Through, and Over?
400
Every time a Confined Space is entered by an authorized associate one of these is required.
What is an attendant?
500
The frequency for testing GFCI's.
What is monthly and after every electrical storm.
500
Under the GHS, Safety data Sheets are strictly formatted with respect to these and the order in which they appear.
What are sixteen categories?
500
The type of PPE that is required in all areas of the shop floor where the sound level is continuously less than 85 decibels.
What are safety Glasses?
500
Guards that require the use of tools for removal.
What are fixed guards?
500
At the Shiloh Plant this group of associates is authorized to enter a Permit Required Confined Space.