Table Saw 1
Do not cut ________ lumber on the table saw.
Rough
Use the right type of blade and make sure the blade is ________, and in good condition.
Sharp
Before using the band saw the blade should be checked to make sure it is ________ and that it is the right type of blade for the work.
Sharp
When you switch on the saw make sure it is ________ properly.
Tracking
Don't wear ________ clothing.
Loose
Keep your ________ away from the blade and out of the path of the cut.
Hands
Get permission before you change the blade or make any other major ________ on the saw.
Adjustments
The wheel guards must be ________ and locked before the saw is turned on.
Closed
Guide the material so your hands and fingers are ________ in the path of the cut.
Never
Make sure the ________ is in place over the belt and pulleys.
Safety Guard
Do not start to cut until the saw has come up to ________ speed.
Full
Turn off the saw and wait until it is completely ________ before making any minor adjustments.
Stopped
Never stand on the ________ side of the table, and don't let anyone else stand on that side while the saw is running.
Right
You should never try to cut ________ stock on the band saw.
Cylindrical
Use the ________ to tighten the chuck securely.
Chuck Key
Ask for help when you cut a ________ piece of material. Ask someone to "tail-off" for you.
Large
Always use a ________ when you are making a narrow cut.
Push Stick
Wait for the saw to come up to ________ speed before you start the cut.
Full
Always turn the band saw off and wait for it to come to a complete stop before you ________ it.
Leave
Use ________ to hold the work firmly on the table.
Clamps
Don't do anything that hasn't been ________ for you.
Demonstrated
Be sure the miter gauge slides ________ down the length of the guide slot before you start the cut.
Freely
The blade guide should be adjusted so that it is about ________ above the material you are going to cut.
1/4 Inch or Quarter Inch
Do not use the band saw until you understand how to use it correctly and ________.
Safely
Allow the drill bit to ________ before you touch it.
Cool Off