Hazard Awareness
Anything with the potential to cause harm to life, health, or the environment. A hazard maybe be dormant, armed, or active,
What is a Hazard.
To control hazardous energy during servicing/maintenance and prevent unexpected start up.
What is the purpose of LOTO?
Reducing risk of shock, ark flash, and arc blast through safe electrical work practices.
What is the focus of NFPA 70E
Must be inspected before each use and during, discard defective gear, measure for stretch, document periodic inspections.
What is required inspections for rigging chains?
Any near miss, property damage, injury (first-aid to fatal) environmental release, emergency response, OSHA notifiable event, or customer required case.
When is incident and accident reporting required?
Stored in the upright position, secured from falling, protected from impact, and clearly labeled by gas name.
How cylinders must be stored?
Surfaces built/coated prior to 1978 should be tested for this material.
What is lead?
Opening process piping/equipment at flanges, unions, valves and by cutting/drilling. Where nonhazardous and hazardous materials may be present under pressure or residual content.
What is line breaking
At or above 85 dBh TWA over 8 hours.
When is hearing protection required?
Acid/caustic burns, melting/charring, snag/tears, broken stitches, visible red core or distorted fittings.
What are inspection triggers to remove synthetic slings from service?
Crew to contact CL, CL to inform GS's, GS's coordinate care/site status and reporting
Who is contacted in the event of an incident or accident?
Must be separated by 20' or a non-combustible barrier.
How O2 and fuel cylinders must be separated.
Atmospheric testing, ventilation, isolation/LOTO, attendant, permit, and rescue plan.
What is required for confined space entry?
SDS, JHA/task plan, boundaries/work area, emergency procedures and PPE requirements.
What must be reviewed before a line break?
Inhalation, skin/eye absorption, ingestion, and ingestion.
What are routes for chemical exposure?
Job/shop hooks, makeshift fasteners, wrong size pins; fittings must meet or exceed sling rating.
What hardware is prohibited?
This legal protection ensures employees cannot face retaliation for reporting workplace incidents or accidents.
What is whistleblower protection?
feet shoulder width apart,one foot slightly back, bend knees with back straight; tighten core.
What describes proper lifting stance?
This is used in the manufacturing of plastics and detergents, gasoline/fuels, some workplaces, and tobacco smoke.
What is Benzene?
Electrical, mechanical, hydraulic, pneumatic, chemical, thermal, and gravity energy.
What forms of energy required controls/LOTO?
Filters contaminants from ambient air; supplies clean air from another source.
What is the difference between APR and SAR?
10% visible strand breaks, kinking, crushing, bird-caging, corrosion, or other defects.
What are the requirements for removing a wire sling from service?
This is required from the field after an incident/accident has been reported. It includes the time and location of the incident/accident, the individuals involved, and a brief description of what occurred.
What is a field report of incident?
Daily PSM review, hazard identification, verifying controls before work can begin.
What is a CL responsibilities?
Provides a low-impedance fault path to reduce shock or fire risk.
What is the role of grounding?
Testing to confirm absence of voltage/energy; LOTO is not complete until ZES has been verified.
What is verify zero or zero energy state?
This is the new OSHA regulation 1926.95 that focuses on PPE.
What is PPE focused on fit and function.
They support tools to reduce strain and improve control at a work station.
How do tool balancers work?
All injuries/illness per OSHA recordkeeping and customer requirements.
What should be recorded on a 300 log?
Prevent catastrophic chemical incidents by identifying hazards, analyzing risks, and establishing control.
What is the purpose for PSM?