A vehicle (mechanism) mounted with an articulating or extendible boom to which a bucket or platform is attached.
What is an Aerial Device.
100
These safety rules are designed to provide safety protection for all employees. You shall _______ these safety rules throughout your employement.
What is "Retain".
100
No _________ shall be removed from any machine or piece of equipment except to perform required maintenance.
What is "Guard".
100
_________ shall not be used to make a wrench fit.
What are "Shims".
100
When operating a forklift, the operator shall always look in the ___________ of travel.
What is "Direction".
200
Transformer or equipment in a surface mounted enclosure normally worked from ground level.
What is a Pad Mount.
200
The contents of first aid kits shall be inspected __________, and material replenished as necessary.
What is "Monthly".
200
________ ___ ___ ________ tags provide protection from defective tools, machines, or motor vehicles and shall not be used as general information or instructional tags.
What "Danger Do Not Operate".
200
___________ shall never be pointed at any person.
What are "Tools".
200
Industrial trucks shall not be __________ while the motor is running.
What is "Fueled".
300
Suspended particles of solid matter (such as pollen or soot) in such a fine state of subdivision that they may be inhaled, swallowed, or absorbed into the body. Does not diffuse in the air but may settle under the influence of gravity.
What is Dust.
300
When a ___________ condition is observed, regardless of department, it shall be promptly reported to the proper authority.
What is a "Hazardous".
300
Electric __________ shall be inspected before each use and shall not be used to lower or lift the tool.
What are "Cords".
300
Material or equipment shall not be stored under energized lines, buses or energized equipment unless a minimum clearance distance of ________ feet can be maintained at all times.
What is "10".
400
Dangerous, hazardous, defective, or unusual condition.
What is an Unsafe Condition.
400
Employees shall be familiar with the basic techniques for ________ ____ so they can provide emergency treatment to fellow employees.
What is "First Aid".
400
When you receive a report of any hazardous emergency condition, you shall obtain what 3 pieces of information?
What is the name of the informant, the exact location, and the nature of the trouble.
400
___________ with sprung or damaged jaws shall not be used.
What are "Wrenches".
400
Signals to the equipment operator shall be given by one person designated to perform this task, but the operator shall obey "_____________" signal given by anyone.
What is "Stop".
500
An Alliant Energy employee, who by virtue of training, experience, and demonstrated proficiency is capable of identifying existing and predictable hazards and is capable of applying corrective measures.
What is a Competent Person.
500
Automatic External Defibrillators (AED's) are located in what four locations at Edgewater?
What are the Shift Supervisor's Office, Maintenance Shop, Coal Yard Office, and Ash Site locations.
500
Only one _________ in a file cabinet shall be open at a time so as to prevent the possibility of the cabinet tipping.
What is "Drawer".
500
Personnel shall not be exposed to the effects of compressed air used for cleaning purposes, except where reduced to less than ______ psi and then only with effective chip guarding and PPE.
What is "30".
500
Employees shall not be _________ a suspended load or _________ the angle of a winch line.