The VSAT-M antenna size.
What is 1.8 Meters?
The bands the VSAT-L can operate in.
What are X, Ku, and Ka?
The bands the MCWS-X can operate in.
What are X, Ku, and Ka?
The inital Tx power for the VSAT-M.
What is -15?
The purpose of the Spectrum Analyzer.
What is to measure frequencies?
The bands the VSAT-S/M operate in.
What are Ku and Ka?
This provides the 10MHz reference.
What is the RMR?
The MCWS-X antenna size.
What is 96cm?
The primary purpose of the MRT.
What is to control the timing of a TDMA network?
The default Span for finding the satellite.
What is 10 MHz?
The name of the VSAT-S/M ACU.
What is 303T?
The power switch for the HPA/SSPA.
What is CB5?
The Linkway modem IP for the CBM-400.
What is 192.168.1.1?
The "E" in CBM-400/E.
What is Enhanced?
The spectrum analyzer uses this port on the VSAT-S/M.
What is MRT Rx?
The username and password for the Digi GUI.
What is root and VSat678*! ?
The KU SSPA GUI username and password.
What is cpi and cpi?
The two modems for the MCWS-X.
What are CBM-400 and 950MP?
The bootfile name of the first traffic terminal.
What is 0x400?
The equation to find the Center Frequency.
What is Beacon Freq - Rx LO?
What is 10.165.50.3?
The VSAT-L requires this to do simultaneous TDMA and FDMA.
What is the GATR?
The battery life of the MCWS-X on BB-2590's.
What is 6-8 hours?
The IP used to access the AMRT NCM.
What is 10.10.1.4:35000?
The frequency used on your SAA to find your Carrier.
What is Receive Frequency?