Hot Work
The person designated to inspect area of hot work being performed to watch for heat, slag, or sparks in case a fire starts.
What is Fire Watch
What is before each use.
Person designated to stay outside the confined space while work is being performed to maintain communication with workers inside the space and have means to summon help if needed.
What is an attendant (hole watch)
What the acronym SHE stands for.
What is Safety, Health, and Environmental
Equipment that is filled with an extinguishing agent specific for type of fire that is likely to occur in the approximate area of placement.
What is a fire extinguisher.
Working at height between these two heights does not require a permit if a JHA and SOP has been developed for the task.
What is 4' and 20'.
Must be conducted prior to entry into any permit required confined space and is done to ensure that are no toxic/flammable gases present and that there is enough oxygen present in the space.
What is atmospheric testing.
Controlling exposures for self and others.
What is Safety?
The amount of time continuous fire watch is required following any level 2 hot work activities.
What is 1 hour
Working height at which a WAH permit is required no matter what.
What is 20 feet.
Must be used by entrants to continuously monitor atmosphere inside confined space while work is being performed.
What is Personal gas meters/monitors.
What is personal protective equipment.
Amount of incremental time required for intermittent fire watch following the completion of continuous fire watch after level 2 hot work has been completed. (Every how many minutes)
What is every 15 minutes
Adequate anchorage points should be able to support this amount of this amount of weight per worker attached.
What is 5000 lbs.
Entry supervisor must notify them before entry into a permit required confined space in case emergency rescue is needed.
What is the local fire department (designated rescue team)
The meaning of the acronym EAP.
Level of hot work being performed is unlikely to cause sparks, slag, or heat such as with hand tools, band saws, pipe threaders, etc.
What is Level 1
The ratio of vertical height to horizontal distance a ladder must be placed at to maintain safe positioning.
What is 4:1 (1' away for every 4' high)
The required PPE for entry into any permit required confined space.
What is a hard hat, safety glasses, safety boots, and a full body harness unless it would increase the risk.
What is Context, Action, Result-Or Alternative Action, Alternative Result.
Level of hot work being performed is likely to produce sparks, flame, slag or heat.
What is Level 2
Frequency of which scaffolds must be inspected during use.
What is weekly.
What is a CS Entry and Exit Log.
What is the rally point/muster poing/assembly area. (Physical location of site specific will work)
Used to cover non removable flammable hazards, to seal wall/ceiling/floor openings, or to protect contained flammable hazards (piping/storage systems) during hot work operations.
What is fire resistant blankets/tarps.
What is top rail, mid rail, and toe board.
All permit required confined spaces must be labeled with this lettering.
This is a detailed overview of a job which includes each step of the work being performed, the hazards associated with them, and the control measures that are taken to mitigate risk. This must be completed prior to completion of any non-routine task.
What is a Job Hazard Analysis.
Persons from whom approval is needed to proceed with Level 2 hot work during normal business hours.
Who is the Site Superintendent and the SHE Coordinator
A rescue plan must be prepared and made available when performing any work over this height.
What is 13 feet.
Confined space definition 1 of 3: Large enough so that a person can do this to perform work.
What is fully enter.
A category of waste materials designated as "hazardous waste", but containing materials that are very common including batteries, lamps, pesticides, and mercury containing equipment.
What is Universal Waste?
Permit level for work requiring the use of non-intrinsically safe power tools in a Class 1 or Class 2 electrically classified area.
What is Level 2
The amount of lifelines required to be used (per worker) when working on high angle roofs.
What is 2.
Confined space definition 2 of 3: Must be a space that is not designed for this.
What is fuel source, ignition source, oxidizing agent, and confinement.
Meaning of the acronym LEL.
What is Lower Explosive Limit
The meaning of the acronym MEWP.
What is Mobile Elevated Work Platform.
Confined space definition 3 of 3: Word(s) used to describe the means of entry/exit into a confined space.
What is restricted or limited.
The reportable quantity of oil in the event of a spill to waterways or drains that lead to waterways.
What is a sheen across the surface of the water?