Hot Work
A __ft rule check is required before any hot work is to be completed
35
_ _ _ _ _ or _ _ _ _ _ _ _ _ _ toe boots are required in production areas
Steel or Composite
This is a place EVERYONE should go if they sustain a substantial shipyard injury.
Clinic
Define two characteristics that define a confined space
Not designed for continuous occupancy and limited or restricted means of entry/exit
you can walk under a JLG only if there's nobody on it.
FALSE. Never walk under a JLG
Which of these is a combustible material
Osha approved wood, Steel, propane
Any wood is a combustible material. Propane is a flammable liquid.
The difference between the two is the flash point, or the temperature in which the a flame is ignited.
A hardhat can be fitted backwards, so long as the brim parallels to the ground and suspension is changed. (T/F)?
TRUE
A hazard such as low hanging staging can be categorized as what type or hazard
Strike against hazard
A cellphone light ISNT a sufficient for a second source of lighting. (T/F)
TRUE
FALSE
A class C fire extinguisher is used for _______ Fires
electrical
From the Neck up, What are the 3 PPE items required for production.
Safety Glasses, Hearing Protection, and Hard hat
This is the most common form of injury at the shipyard
Body in Motion
define the confined space sign via their colors. (Red, yellow, Green
Red- Danger. Do not enter
Yellow- You can enter, but no hotwork
green. Entry and hotwork is approved
A minimum of _" of paint is to be removed following welding or tacking
4
The P_ _ _ methd should be utilized when operating a fire extinguisher.
P a s s or pull, aim, squeeze, sweep
CRG's should be used when using power tools like a grinder, torch, surface grinder, etc.
FALSE
This can help prevent body in motion injuries.
when adding ventilation to a tank, you must wait a minimum of __minutes before entry
20
15mph
A Class A extinguisher should be used for ____ Fires
Ordinary combustibles
This is the rating the shipyard uses to certify safety glasses
ANZI Z87
Mechanical, Pneumatic, Electrical, and hydraulic are examples of what?
Hazardous energy
prior to entry in a red tagged tank, a ______ _______
is someone who can properly test and tag the tank
marine chemist
A height of an unguarded edge requires safety rails and/or a harness if above how many feet?
5ft