Band Saw
What cuts should be made to prevent the blade from binding in sharp curves?
How can the operator prevent the blade from binding when cutting warped, bowed, or long stock?
Clamp stock to the table
If drilled stock starts to revolve what do you do?
Turn off drill press and free stock.
What spinning side of the disc do you use to prevent kickback?
Downward
Is horseplay allowed in the shop?
No.
If the blade breaks on the band saw what do you do?
Shut off the power and move away quickly.
How many inches should the hands or fingers be from the blade when operating?
6 inches
What do you check when selecting proper drill bit?
Size, sharpness, and shank type
How do you hold a piece of stock when sanding?
Steady
What should be worn at all times in the shop?
Safety glasses
What do you use when sawing small stock?
A push stick
What is the purpose of a trial cut?
To see if the saw is cutting properly and is set correctly
What precaution should be taken when drilling long material?
Support unclamped end with a stand
How many inches do you always keep your hands and fingers from the belt when the machine is moving?
4 inches
The shop should be what by the end of class?
Cleaned
What is the procedure to determine if the blade is operating on the middle of the band saw wheel?
Turn wheel by hand to check
How should the saw blade be moved through the stock when making a cut?
At a safe speed that will not burn or splinter the stock.
What should you do to prevent seizing?
Reduce feed pressure
Do not sand pieces that are of ___ and ___ that can become wedged between the belt or disk?
size or shape
Why should you not rush work?
It could lead to equipment damage, poor project quality, and accidents/injuries.
The danger zone is where for the band saw?
To the right of the operator's position.
What is the purpose of a stop block?
Improve cut accuracy and reduce the time it takes to make many cuts
What type of chuck should be used with a straight shank twist drill?
Jacobs chuck
What should you do periodically to prevent a fire?
Clean Sander
What does the yellow color coding system refer to?
Caution