Eye and Face Protection
Which of the following, along with Z87 designation, should be stamped on the lens or frame of safety glasses in order to be considered industrial quality?
Manufacturer's Trademark
Out of the following types of hearing protectors, which has an NRR Rating of 27 to 33?
Earplugs
Eli is staining his wood project using a pneumatic sprayer. Which respiratory protection should he be wearing.
Respirator
Student and workers should NOT preform which of the following inspections on their hard hat?
Ensure hearing protection is attached
This types of gloves should be worn when handling metal and sharp edges.
Leather gloves
Which of the following welding shades would be suitable for oxy-fuel welding and cutting?
Shade number four or five
True or False: Hearing loss usually occurs suddenly and without warning
False
An N95 dust mask can protect the lungs from dust particles of what size?
0.3 micron or larger
When should fire resistant clothing be worn?
When welding
Type of gloves worn when welding and cutting
Heat/Fire rated gloves
Maddie is sanding a piece of wood and sawdust entered her eye from not wearing safety glasses. What should be the first thing Maddie does?
Use the eye wash station
A saw produces 100 decibels of sound. If a worker is wearing hearing protection with an NRR Rating of 30, then the worker should only hear _______ decibels of sound.
70
True or False: Respirators with filter canisters can protect the lungs from harmful fumes.
True
True or False: Long hair should always be pulled back and pinned out of the way
True
Chemical resistant gloves
__________ burn is caused by viewing certain welding procedures and not wearing the correct eye protection.
Flash Burn
Hearing protectors must be tested and approved by ANSI in accordance with ________.
OSHA
What areas should be protected by personal protective equipment.
Eyes, Feet, Hands and Torso
Which of the following types of footwear are suitable for the shop?
Leather boots
Gloves worn when moving general materials and equipment.
False
NRR Stands for which of the following?
Noise Reduction Rating
Mark is working in the wood shop. Which of the following scenarios would be a safety hazard?
Long hair and loose clothing
When moving hot metal pieces in the shop, which types of gloves would provide the best protection?
Heat/Fire Rated Gloves