Switches & Buttons
This opens the air line to the machine.
What is the air valve?
This command homes the machine.
What is C3?
This axis runs the length of the table.
What is the X axis?
The coordinates for machine home.
What is zero zero?
This tool is used most for engraving.
What is a V bit?
This green button is on the pendant.
What is the start button?
This command zeroes the top of your part.
What is C2?
This axis runs the width of the table.
What is the Y axis?
The spindle rotates between 8000 and 12000 of these.
What are RPMs?
This tool is used most for cutting.
What is a straight bit?
This blue button is on the pendant.
What is the reset button?
This command changes the tool.
What is C1?
This machine part operates in RPMs.
What is the spindle?
This is the recommended depth of cut for engraving.
What is 0.0625? (1/16")
This tool helps find Z zero for your part.
What is the zero plate?
This red button is on the pendant.
What is the emergency stop button?
This command moves two axis.
What is M2?
This machine part helps control sawdust.
What is the dust skirt?
This is the distance from home to part zero.
What is the part offset?
This device holds the tool.
What is the tool holder?
This yellow power switch is located on this.
What is the control box?
This command opens the keypad.
What is K?
This machine part runs on rails the length of the machine.
What is the gantry?
The CNC machine uses this coordinate system.
What is the Cartesian coordinate system?
This compressible fitting holds the tool.
What is the collet?