Sonic Head
What would be the correct setting for the Head Air Pressure
What is 75-80 PSI
How many daily grease points are on the TSI 150CC?
What are 5
What are the four-rig safety checks we perform every shift prior to drilling?
What are Cut off Sensors, Emergency stop switches, Hydraulic filter status, and fan override switches
What are the two types hydraulic systems on our 150CC?
What are A closed loop and open loop system.
New oil added to the rig is considered?
What is Dirty Oil
How Many Head shut down sensors are there?
What is 6
What type of oil goes into the Head lube tank?
What is Mobil 1 10w30 Full synthetic
What is the best way to keep track of your drilling depth?
What is Count your drill pipe and casing before drilling starts
Who is your favorite Sonic Driller Trainer?
Who is All of them
How many hydraulic oil filters are on the TSI 150CC?
What are 7
What are the 6 Sonic head shut down Sensors?
What are Air Pressure, Low Tank level, Low Lube Pressure, High Bearing Pressure, low bearing pressure and high temperature.
What is the first thing you should check when you are having and electrical issue?
What are the fuses
If all of your rig functions are working but the head will not oscillate what is the most likely cause?
What is the DCO Switch is in the neutral Position
What is the correct deflection for the tower chains?
What is 1"-1 1/2"
What size of particle do our filters filter down to?
What is 6 micron
What is the fasted way too cool down an overheated drill head?
What is engage the rotation and wait
If you have an issue with the engine, who do you call?
Who is John Deere
What is the most effective tooling size for drilling in cobbles, boulders and waste dump piles?
What is 6"x7"
How many different types of drill rigs does TSI manufacture?
What is 6
What is the preferred type of hydraulic oil to use when your ambient temperatures are consistently below freezing?
What is ISO32
How do you perform an Air spring pass fail Test?
What is, Grab a piece of steel with the wrenches and pull up and push down while watching inside the drill head to confirm dog bones are recovering to the level position.
At how many engine hours should you perform a full service?
What is 300Hrs
What does the acronym SPM stand for?
What is Sonic Percussive Method
Which or our service technicians has the nickname " the G.O.A.T "
Who is Joshua Rauch
What is the best way to remove water from the hydraulic oil?
What is vacuum Dehydration