Spicers
Rack Inspections
Rack Inspections
The front upright allowed deflection in inches.
What is over 1/8 inch deflection over a span of 40 inches ?
Contact person for an incident that is defined as black.
Who is the general manager for that operation?
Person ultimately responsible for my safety.
Who is myself?
The name of an injury that results in a restricted workday or requires treatment.
What is a Medically Treated Incident?
Maintaining RODS (Record of Duty Status) (either via paper log or ELD), as per federal Hours-of-Service regulations.
What is when you are in excess of 160 kms from home base?
The side upright allowed deflection in inches.
What is 2/8 inches within a span of 40 inches
Important procedure to maintain if I am climbing a ladder.
What are the three points of contact?
Using your legs to lift will help prevent injury to this part of your body.
What is my back?
The timeframe to report an Lost Time Accident to WCB - WSIB- WorkSafeBC - CENESST
What is 72 hours or 3 working days?
In Canada, under the Transportation of Dangerous Goods (TDG) Regulations, you are required to placard your truck when you are transporting dangerous goods.
What is when you excess Dangerous Goods ≥ 500 kg (aggregate quantity)?
The allowed deflection on a horizontal or diagonal brace.
What is 3/8 inches.
Maximum height allowed without fall protection.
What is 3 meters or 10 feet?
Procedure if you find a safety hazard.
What is report it?
Retention time of Incident Investigation Reports in most regions.
What is 10 years?
A bungee cord requires what to be used in a commercial truck.
What is a Working Load Limit ( WLL)
The definition of a yellow rack inspection tag.
What is Low priority damage that is considered minor for the structural integrity of the system.
The procedure if you find a safety hazard.
What is report it?
Stacking procedure according to weight.
What is heaviest on the bottom?
Accessing the Investigation Reporting Kits.
What is the Intranet?
SDS sheet requirements.
What is when selling or distributing a hazardous product to a workplace?
Racks with a yellow inspection tag service requirements.
What is they must be identified and addressed in a timely manner?
The meaning of PASS when using a fire extinguisher.
What is Pull, Aim, Squeeze and Sweep?
Reason for reporting accidents and injuries.
What is to prevent them from happening again?
Name 2 of 4 key purposes of WCB - WSIB - WorkSafeBC & CNESST
What is
Support Injured Workers?
Employer Protection?
Promote Workplace Safety?
Dispute Resolution?
Calculate the new Load Center / Capacity for fork extensions
(Truck Capacity x Load Center) / (New Load Center) = Revised Capacity