Fastening Devices
Fittings
Specialty Items
Shop Supplies
Wild Card
100

Threaded fastener, used with a nut. 

Bolt

100

Used when a branch is required from a main run of piping. 

Tee

100

Various designs used to attach pivot points of different linkages.

Linkage clips

100

Formulated to provide lubrication to most areas of the vehicle where metal components are designed to slide or rotate at low pressure. 

General Purpose (GP) Grease 

100

Used to attach a U-shaped, adjustable yoke called a clevis. 

Clevis pin

200

Inserted into a threaded hole and tightened or loosened by applying torque. 

Cap Screw

200

Used to allow for quick and easy assembly and disassembly of piping systems. 

Unions

200

Fit into a groove in a shaft or inside bores and housings to locate, hold, lock and retain a bearing, gear or other part on the shaft.

Spring Rings (Retaining Rings)

200

The size of grit particles will determine the coarseness or aggressiveness. 

Sandpaper

200

Made of spring steel and slightly oversize, with appropriate tension to fit tightly in the hole. 

Hollow pin

300

The outer edge of the inclined portion of the thread.

Crest

300

Used to reduce pipe sizes, available in face and hex design.

Bushings

300

Used to retain a hub, collar, gear or sleeve in position on a shaft.

Set screws

300

Used on fasteners to prevent vibration loosening.

Threadlockers

300

Measured by it's outside diameter and wall thickness depending on type.

Tubing

400

The inner valley area between each thread.

Root

400

Create a stronger connection than soldered or compression fittings.

Flare fittings

400

Used in applications such as small pulleys, gears or stub ends for drive shafts.

Woodruff (halfmoon) keys

400

Designed primarily to attach rubber seals firmly around doors, trunk lids and where rubber needs to be secured. 

Weatherstrip adhesive

400

Fitting is inserted into hose and clamped. 

Barbed fitting for hose

500

Measurement across root to root.

Minor diameter

500

Not interchangeable or used for high pressure applications.

Compression fittings

500

Used to keep other fasteners in place.

Cotter pins 

500

Does not conduct electricity, can be used at any electrical connection to prevent corrosion and prevent voltage leakage around electrical connections.  

Dielectric Silicone Grease

500

Same function as cotter pins, also known as spring locking pin.

Internal Hair Pin / Hitch Pin Clip

M
e
n
u