Compartments
These are the amount traffic cones located on ladder 3.
What is 5.
This happens when vertical ventilation is conducted?
What is increase visibility and allow less heat for firefighters and victims.
This is the preferred angle of the ground ladder to a window.
What is 75 degrees.
These tools are used during forcible entry.
What is the haligen bar and flathead axe.
This type of construction is known as heavy timber or mill construction
What is type IV construction.
This is the compartment in which the KED is located.
What is compartment 7
These considerations affect the decision to ventilate
What is location for ventilation, weather conditions, and exposures.
Ground ladders should be placed how many rungs above the roof line?
What is 3-5 rungs.
These are the three parts of the haligen bar.
What is the adz end, pic, and fork end
This structure is a portion of the exterior walls of a building that extends above a roof.
What is a parapet wall
What is compartment 8
This would be the preferred side during ventilation.
What is the leeward side
This is the minimum amount of feet a quint apparatus is required to have of ground ladders.
What is 85 feet.
This hydraulic tool is designed to open inward swinging doors.
What is the rabbit tool.
This is a horizontal member between trusses that support the roof.
What is perlins.
These two hand tools are located on top of the aerial.
What is a roof hook and pick head axe.
This is the minimum distance away from an opening during hydraulic ventilation?
What is two feet.
How many total amount of ground ladder feet does ladder 3 have
What is 140 feet.
This tool fits between double swinging doors equipped with panic hardware and is used to activate the door mechanism from the outside.
What is J-Tool
Overhead roll-up fire doors may be equipped with this to trigger deployment.
What is a fusible link.
The air hose is located in this compartment.
What is the compartment behind the driver seat.
This cut is the easiest and fastest inspection hole.
What is a Kerf Cut
What are the names, amount, and sizes of the ground ladders associated with ladder 3
What is one 10' foot folding attic ladder, one 14' foot combination ladder, three 16' foot roof ladders, one 28' foot extension ladder, one 40' extension ladder
This tool uses a case hardened screw that is screwed into the key way of the padlock.
What is the bam-bam tool
This is the way the fire service determines a collapse zone.
What is the height of the structure times 1.5