Small & Large Side
The range of time that a container is in the RCW on the small side.
What is 90-120 seconds?
The maximum amount of weight that the blending conveyor can hold.
What is 50,000lbs?
The amount of time the water in the steam drum will last to cool down the system.
What is 2 hours?
The way the sock filters are cleaned inside of the baghouse.
What is air being blown into the socks?
Another name for the water we receive from the lake.
What is purple water?
The type of conveyor used to load and unload trailers on the small side.
What is telescopic conveyor?
The indicator for the blending conveyor to stop.
What is the weight inside of the charge bin?
The two things kept inside of the steam drum.
What is water and steam?
The name of the valve that opens up when gases need to be diverted to the bypass.
What is a butterfly valve?
The name of Mark's trucking handle.
What is Trinidad?
The name of the scale used to measure radiation.
What is Geiger scale?
The type of system that the charge elevator runs on.
What is a hydraulic system?
The name of the process that occurs when the system needs to be stopped.
What is a burndown?
The name of the steel that the duct is made of entering the AGR.
What is duplex steel?
The micron size of the first step of filtration in the RO system.
What is 50 microns?
The three stages of the RCW on the large side.
What is rinse, sanitize, and dry?
The name of the gauge that measures the temperature inside of the hopper.
What is a thermocouple?
This acts as a suction for the gases to be pulled down into SCC1 into SCC2.
What is the afterburner?
This is sprayed into the steam inside of the condenser (condensation tower).
What is Reverse Osmosis (RO) water?
The technical name for the bad stack.
What is the Emergency Relief Valve?
What are rotonics, macros, and pallets?
The full name of the measurement of a component's heating value.
What is British Thermal Units?
The equipment that returns the water back into the steamdrum after being cooled.
What is the vertical pump?
The system that controls the pressure throughout the process.
What is the Induced Draft (ID) fan?
The 8 pollutants that are measure for emission limits.
Particulate Matter (PM), Opacity, Carbon Monoxide (CO), Sulfur Dioxide (SO2), Nitrogen Oxides (NOx), Hydrogen Chloride (HCl), Heavy Metals (Lead (Pb), Cadmium (Cd), Mercury (Hg)), Organics (Dioxins/Furans).