Front Suspension
Rear Suspension
Alignments
Steering
Components
100
This system has no upper control arm
What is McPherson Strut
100
This component limits the lateral motion of a solid axle with coil spring
What is a Pan Hard Bar or Track Bar
100
.5 Degrees
What is number of degrees of differents that would cause a pull
100
Power steering Pump
What is What is the component that creates the power in power steering
100
This component is normally connect to the lower and runs back to a frame crossmember
What is torsion bar
200
The upper part of the McPherson strut pivots on this component.
What is the upper strut mount?
200
Under heavy acceleration the rear tires can begin to hop. This is officially called what?
What is Axle Windup or Wheel tramp
200
This angle gives us toe-out on turns
What is the Ackerman Angle
200
Tie Rod
What is the component that connects the rack of center link to the steering knuckle
200
This type of spring has a consistent rate
What is linear rate spring
300
On some styles of suspension this component limits the forward and aft movement of the lower control arm.
What is the strut rod?
300
This style suspension offers the greatest traction and ride comfort.
What is Independent suspension
300
2-8 degrees
What is typical number degrees caster would be set to?
300
Steering Arm
What is the part of the knuckle the tie rod mounts to?
300
These tires have cord positioned at a right angle to the bead
What is radial tire
400
This suspension system has no upper control arm.
What is McPherson strut or Modified McPherson
400
Tis suspension uses an inverted U channel
What is Semi-Independent
400
Thrust angle
What is reference angle used to set the front toe?
400
Sector shaft
What does the pitman arm mount to?
400
This component guides, supports and reduces firction
What is bearing
500
This is the total number of ball and socket joints in a typical SLA
What is 4. 8 including inner and outer, 12 depending on sway bar end links
500
On a parallel leaf spring solid axle, the vehicle handles erratically when driving. If this part were loose, it could cause this.
What is U bolts
500
Set Back
What is the term use to describe one wheel being further behind the the other?
500
spool and rotary valve
What is control the flow of the p/s fluid
500
The term that describes a tire that can cause a pull
What is conicity
M
e
n
u