CMDP
CMDP is a Commander’s program. Which of the following is not a commander’s responsibility when implementing CMDP?
a. Implement CMDP by using their existing resources
b. Ensure all existing maintenance evaluation programs absorb CMDP
c. Designate activities to assist with implementing CMDP
d. Establish maintenance discipline doctrine
Establish maintenance discipline doctrine
(page 5)
Maintenance Plans are accessed through which t-code?
a. IZMPRTP
b. IP42
c. IP10
d. ZMPRPT
ZMPRPT
(page 111)
Maintenance __________ is integrated into all operations through the military decision making process (MDMP) to ensure synchronization and unity of effort and includes identifying requirements, reviewing available assets, and preparing a maintenance estimate.
a. Planning
b. Reporting
c. Services
d. Repair
Planning
(page 163)
______________ are demand supported repair parts and consumable items stocked by the modified table of organization and equipment (MTOE), table of distribution and allowances, (TDA) or joint table of allowances maintenance organization.
a. Bench stock
b. Class IX stock
c. On-Board spares
d. Shop stock
Shop Stock
(page 213)
Used to complete repairs identified during routine services resulting from preventative maintenance. This statement describes which type of maintenance work order?
A. PM01
B. PM04
C. PM02
D. PM06
PM02
(page 123)
In what publication can you find the Field Level Requirements Checklist?
a. AR 750-1
b. DA PAM 750-2
c. DA PAM 750-1
d. ATP 4-33
DA PAM 750-1
(page 11)
oOperations are entered in which tab of the GCSS-Army work order?
A. General
B. Order Data
C. Operations
D. Components
Operations
(page 138)
Which of the following is not considered a part of field level maintenance?
A. Recovery tasks performed by crew or support personnel
B. Off-system maintenance
C. Battle damage assessment repair
D. Unit level maintenance
(page 151)
SSG Fish from another unit requests to borrow a piece of TMDE from your shop. What should be used as a temporary hand receipt?
A. DA Form 2088
B. DA Form 2062
C. DA Form 3161
D. Memorandum signed by the Commander
DA Form 3161
(page 189)
Which of the following is not a characteristic of battle damage assessment and repair (BDAR)?
A. Estimates the damage composed of physical and functional damage assessment resulting from the application of lethal or nonlethal military force.
B. Restores the minimum essential combat capabilities necessary to support a specific mission.
C. Applies to sustainment maintenance procedures only and depends on operational variables, extent of damage, time allowances, and available personnel.
D. Carried out rapidly in a hostile environment in order to return damaged or disabled equipment to temporary service.
Applies to sustainment maintenance procedures only and depends on operational variables, extent of damage, time allowances, and available personnel.
(page 170)
CPT Smith, your commander, has appointed you as the CMDP Coordinator. You discovered that that a requirement within the Requirements Listing is not complete. As the affected organization, who should you notify immediately?
A. Maintenance supervisors
B. No requirement to notify anyone
C. Higher headquarters
D. Supported units
Higher headquarters
(page 18)
Soldiers are required to pass the GTRAC assessments to be awarded a certificate for the courses. Each Soldier is given _____ chances to pass the assessments?
A. 2
B. 1
C. 3
D. Unlimited Chances
3
(page 60)
_____________ is the movement of equipment to a maintenance site or from one maintenance site to another based on mission variables or a change in maintenance level.
A. Disposition
B. Recovery
C. Evacuation
D. Retrograde
Evacuation
(page 164)
What establishes direct responsibility for items issued to personnel?
A. Commander's assignment of responsibility
B. Items posted to the property book
C. Signature on a hand receipt
D. Shortage annex
Signature on a hand receipt
(page 185)
Which of the following is not a recommendation when maintaining shop equipment?
A. Protect all hand tools from dirt, rust, and corrosion by periodic inspection and cleaning.
B. Identify special tools with the specific equipment for which they are intended.
C. Keep all special tools in an uncontrolled location.
D. Store all tools in their proper place so that interested personnel will know where to find them.
Keep all special tools in an uncontrolled location.
(page 195)
The CMDP is a compilation of existing regulatory requirements. As a mandatory program, CMDP simplifies command, supervisory and managerial responsibilities. Which of the following is not a method used in CMDP?
A. Formalizing follow-up procedures
B. Standardizing evaluation requirements
C. Compiling various regulatory requirements
D. Regulating maintenance discipline
Regulating maintenance discipline
(page 4)
Maintenance Plans are accessed through which t-code?
A. ZMPRRT
B. IP24
C. IP42
D. IP10
(page 105)
______________ maintenance consists of overhaul and remanufacturing activities designed to return components, modules, assemblies, and end items to the supply system or units, resulting in extended or improved operational life expectancies.
A. Depot level
B. Off-system
C. National-level
D. Field support
Off-system
(page 155)
A technical inspection will be performed prior to repair, evacuation, or turn-in of unserviceable end items or components. Inspections will be performed according to equipment ___________ and ____________ standards applicable to the maintenance level performing the repair.
A. Management, restoration
B. Overhaul, reparability
C. Maintenance, serviceability
D. Repair, reset
Maintenance, serviceability
(page 198)
Items that have a good value and will last, but not for great periods of time should have what Army Requirements Code (ARC)?
A. Durable
B. Nonexpendable
C. Dispensable
D. Expendable
Durable
(page 209)
Commanders will conduct a semi-annual formal inspection on brigade and lower size units by their parent organization that has which of the following?
A. Resourcing
B. Training
C. All of the above
D. Authority
(page 21)
The statement “Used for unserviceable recoverable/repairable material is turned-in to GCSS-Army LRC or SSA” describes which type of maintenance work order?
A. PM01
B. PM04
C. PM02
D. PM06
PM04
(page 126)
Wheeled wreckers, such as the M984 and M1089, and tracked recovery vehicles, like the M-88A2, are examples of which type of recovery vehicles?
A. Heavy Vehicle
B. Crew
C. Dedicated
D. Devoted
Dedicated
(page 168)
What form should be used for property issued to the same person on a recurring basis?
A. DA Form 1687
B. DA Form 3161
C. DA Form 3749
D. DA Form 2062
DA Form 3749
(page 191)
Which of the following does not perform field level maintenance?
A. Crewmembers
B. Equipment Operators
C. MTOE units
D. Special Repair Activity
Special Repair Activity
(page 152)