ESD
LOCTITE
Manufacturing Expectations
Line Clearance & Line Prep
Tools & Hardware
Intro to MPI
100
The 4 POINTS of ESD.
Smock | Wrist strap | Station Mat | Shoe straps
100
What is LOCTITE?
Chemical Adhesive / Glue
100
You get a point for this.
Calling in sick.
100
This is done at the start & end of shift.
Line Prep
100
PMC stands for...
Preventative Maintenance Calibration
100
MPI stands for...
Manufacturing Process Instruction
200
This point of ESD must be worn when the icon below is in the MPI.
ESD Wrist Strap
200
You verify this before using LOCTITE.
Intuitives expiration label.
200
Meet here in case of an earthquake or fire Emergency.
Back parking lot.
200
True or False: The satellite bin can be 3/3rd full and left at the station.
False: The satellite bin should be emptied if it's more than 2/3rd full.
200
Name the torque patterns.
Cross or Star, Circular and Straight patterns.
200
BOM stands for...
Build Of Materials
300
This point of ESD needs to be checked twice a day.
ESD Shoe straps.
300
True or False: Loctite shall be applied to the first thread only.
False. About the first four threads.
300
True or False: Holding the door for others without badging in is acceptable.
FALSE
300
True or False: Line prep has an MPI.
False: Line prep is a process activity.
300
What type of torque pattern is this?
Cross or Star pattern
300
What does this ICON mean?
gloves required
400
Contact this area when the date on your work bench is expired.
PMC
400
True or False: It is acceptable to use the same kimwipe when using multiple Loctite.
False
400
PPE Stands for...
Personal Protective Equipment
400
Check the expiration date on these three things.
400
Is it ok to use a hand torque driver if the calibration sticker is broken or missing.
No. This indicates that the torque tool needs to be recalibrated before use.
400
What does these ICONs represent?
LOCTITE
500
ESD Stands for...
Electro-Static Discharge.
500
Most Loctite can be used on Loctite block except for?
CYANOACRYLATES
500
CCEE Stands for...
Character | Capacity | Energy | Experience
500
This is an MPI done at the start of a work order.
Line Clearance.
500
True or False. A hand torque driver can be used when dropped.
False. Hand torque drivers can get damaged and lose its calibration especially when dropped.
500
Make sure that _____ & _____ match with what is scanned into MES.
MSL & SN located on the part