Wireless Settings
This setting is configured to limit the speed at which customers can download and upload data.
What is Traffic Shaping?
The recommended signal strength range.
What is -45 to -65?
The recommended way to make changes to fixed wireless equipment.
What is logging into the device itself?
The reason a port status would be orange.
What is the connection speed is at 100 Mbps-Full?
You would go here to view who the power provider is for a tower.
What is Equipment > Towers > Click on tower site and view power provider.
This setting can split downlink and uplink traffic and support asymmetric traffic as needed.
What is DL/UL Ratio? OR Master TX Duty Cycle (On AF-5X Devices)
A signal with an SNR value of __ dB or more is recommended.
What is 25?
Which tool shows all Ubiquiti residential fiber optic devices?
UNMS
Without logging into the Ubiquiti ONU device, this is where you can view signal, bandwidth, CPU & RAM statistics.
What is UNMS?
The number 120 in CEN-W-120-270 stands for _____.
What is Beamwidth?
This setting prevents wireless clients from communicating with each other.
What is client isolation?
Signal chain disparity should be no more than __ dBm.
What is 3?
What tool will you need to access to disable an ONU?
What is the OLT the device is connected to?
This is where you would go to see real-time download and upload data for a Ubiquiti GPON service.
What is log into correct OLT, search address, and view download and upload data.
This tool will show you all frequencies being used throughout our fixed wireless services.
What is Channel Map under Equipment > Channels.
This feature allows for APs to transmit at the same time and receive at the same time resulting in a reduction in co-location interference.
What is GPS sync?
Quality and Capacity should be greater than __ %.
What is 70-80%?
This tool analyzes the noise environment in real-time so you can select the best frequency.
What is airView?
The identifying number we use to track a residential fiber optic service device.
What is the FSAN?
This database shows all real-time billing data.
What is PCS test?
If radar signals are detected on this channel, the device will vacate that channel and switch to an alternate (if configured that way).
What is DFS (Dynamic Frequency Selection) channel?
The signal level of background transmissions produced by other devices that are unintentionally generating interference on a similar frequency.
What is the noise floor?
This tool allows you to scan for compatible SSIDs in the vicinity of the radio to connect to.
What is Site Survey?
There are __ PON ports on a Ubiquiti OLT.
What is 8?
We have ____ sectors.
What is 84.