Day 1
What number of ladder failures result in ER trips each year?
150,000
How could long hair, loose clothing or jewelry cause safety issues?
It could get tangled up and cause injury/death
Name 2 of the four things that guards protect you from.
Rotating Parts & Point of operation
How much force should you use when working with power tools?
Use as little force as you can and let the tool do the work for you.
What is the point of inspecting a tool before use of said tool?
To spot any dangerous conditions or malfunctions that may occur
What fraction of falls from 6 feet are fatal?
1/3
What does PPE stand for?
Personal Protective Equipment
List 4 important rules when operating an electric sander:
Always keep your body well clear of Moving parts.
Hold portable sanders firmly with Both hands.
Do not apply force to the sander.
Always use it with Teacher Supervision.
What are 2 things you should not do with power cords?
Remove the ground prong on a 3 wire cord.
Use in damp or wet locations.
What hazards should you look out for prior to using a lift?
Overhead obstruction
Leaks
Damaged or Malfunctioning equipment
Uneven/unsafe floor
What does it mean to be overreaching?
You are reaching too far to the side from the ladder and its gonna mess up the weight.
What is the difference between type I and type II of hard hats
Type I protects the top of the head and II protects the whole head
Name 3 of the things you should check for before using a tool?
Dull or deformed blades
Dirty, oily tools
Electrical cord condition
What is never a thing that you should do when carrying a tool?
Carry a tool by cord or hose.
What must be in place before entering the bucket?
Outriggers (Legs)
Must be in place and level with the ground
What is the 3 point rule?
Must have 3 points of contact on that ladder at all times
What are 3 types of injury's that can occur to the hand with unprotected of the hand?
Burn
Cut
Fracture
What are the 3 basic safety rules of using tools?
Use appropriate PPE
Inspect the tool before use
Use the correct tool for the job and use it correctly
What is never a thing you should do when trying to disconnect a tool?
Yank by cord or hose
What are the 4 types of lift hazards?
Tipover
Fall
Electrocution
Head obstruction/collision
What are the 4 things you should remember about proper ladder safety?
Proper selection
Proper storage
Proper setup
Proper use
What are the 5 types of gloves?
Butyl
Viton
Nitrile
Norfoil
Stainless
In the video of the top 5 dangerous tools what were the 5 tools?
Circular Saw
Post hole digger
Angle Grinder
Air Compressor
Chainsaw
Name 2 things to keep cords/hoses away from.
Heat & Oil
What things should you look for when inspecting the workplace/work area.
Beware of drop offs or holes...also bumps & debris.
Watch for overhead obstructions or electrical lines.
Watch out for your hat or hair!!!
Check for hazardous locations (wind, wet, gas) or for any “weak” surface.
Always be on the lookout for unauthorized people!