GENERAL SAFETY
WHO SHOULD YOU TELL IF YOU GET HURT?
THE TEACHER
NEVER _____ A TOOL TO WORK
FORCE
WHAT SHOULD NEVER BLOCK EXITS OR PATHS?
CABLES OR WIRES
YOU SHOULD ALWAYS MAKE SURE THE SWITCH IS OFF BEFORE DOING WHAT WITH A POWER TOOL?
PLUGGING IT IN/TURNING IT ON
YOU ARE RESPONSIBLE FOR DOING THIS WITH ALL MATERIALS, STOCK AND TOOLS YOU USE.
CLEANING AND RETURNING TO THEIR PROPER PLACE
PROPER ___ _______ MUST BE WORN WHEN OPERATING ANY MACHINE.
YOUR HANDS SHOULD BE FREE OF THIS BEFORE USING TOOLS
OIL/GREASE
WHAT SHOULD NOT BE STORED NEXT TO ANY HEAT SOURCE?
COSTUMES
NAME 3 DIFFERENT TYPES OF SAWS
CIRCULAR, JIG/SABER, MITRE, TABLE
ALWAYS KEEP YOUR ________ ON YOUR WORK.
ATTENTION
WHAT SHOULD YOU NEVER LIFT WITHOUT ASSISTANCE?
ANYTHING HEAVIER THAN YOU
THESE TYPES OF TOOLS CAN LEAD TO ACCIDENTS OR INJURIES
DULL
WHAT HAPPENS DURING STRIKE?
THE STAGE IS CLEARED, SET PIECES ARE DISMANTLED AND PUT IN THEIR PROPER PLACES IN THE SHOP, PROPS ARE RETURNED TO THE PROP ROOM
WHAT SHOULD YOU DO AFTER YOU TURN OFF A POWER TOOL?
HOLD FIRMLY UNTIL IT COMES TO A COMPLETE STOP
LOOSE CLOTHING AND THESE 3 THINGS ARE DANGEROUS AROUND MACHINES
LONG HAIR, BAGGY CLOTHES, JEWELRY
WHY SHOULD YOU NEVER INTERFERE WITH SOMEONE OPERATING A MACHINE?
THEY COULD LOSE FOCUS AND GET HURT
A SCREW DRIVER BLADE MUST BE THE RIGHT _____ AND _____ TO FIT THE SCREW SLOT PROPERLY
SIZE AND SHAPE
_______ AND ________ SHOULD ALWAYS BE PROPERLY ILLUMINATED
BACKSTAGE AND AISLES
WHAT IS KICKBACK AND HOW DO YOU AVOID IT?
WHEN THE TOOL JUMPS BACKWARD TOWARD THE OPERATOR / ENSURE MATERIAL IS SECURED / LET BLADE COME TO FULL SPEED BEFORE TOUCHING MATERIAL BEING CUT
CHECK ALL MATERIALS AND TOOLS FOR _________ BEFORE USING.
IRREGULARITIES
IT'S IMPORTANT TO KEEP THE SHOP FLOOR CLEAR TO PREVENT WHAT?
SLIPS AND FALLS
WHAT TYPE OF HAMMER SHOULD BE USED ON MACHINE SURFACES?
WHY ARE TECHNICAL REHEARSALS IMPORTANT?
SOLVE ANY TECHNICAL PROBLEMS, PRACTICE FLOW AND TIMING OF MOVING PIECES, ENSURE THE SAFETY OF THE ACTORS, TEST LIGHTS/SOUND
THIS IS HOW YOU CHANGE THE BLADE ON A POWER SAW.
UNPLUG, MAKE SURE BLADE IS FULLY STOPPED, FOLLOW MANUFACTURE INSTRUCTIONS
WHO IS ALLOWED TO STAND AROUND A MACHINE WHEN IN USE?
THE PERSON RUNNING THE MACHINE OR THE TEACHER