What do we always do before we start working on our wood lab projects?
Put on safety glasses.
100
In Industrial arts what measurement system do we use?
a. Metric system
b. Hands system
c. American Standard system
d. Toes System
American Standard
100
What is a try square used for?
Try squares are used for layout
and making perpendicular lines.
100
What is the force that pushes a rocket forward?
Thrust
100
If you have two quarters in your ears what are you listening to?
50 cent! YO!
200
Give one safety rule when using the drill press.
Keep hands a safe distance from drill bit.
Never cross arms to hold down material or pull down handle.
No loose clothing or jewelry.
Never grab spinning chuck when drill pressed is turned off.
200
How many fractions are in one inch?
16
200
What type of saw would you use to rough cut your material?
Crosscut saw.
200
What is the front pointed part of your rocket called?
What is the nose cone!
200
What goes up but at the same time goes down up towards the sky and down towards the ground?
See saw/ Old fashion Scale
300
True or False hearing protection is never required in a wood lab?
False
300
Find 4 3/4 on the side white board ruler.
FIND IT
300
What is the claw of a hammer used for?
Creates leverage to help in pulling out nails.
300
What law of motion explains how a rocket works? For 20 bonus points state the law. (Potential to steal points)
Newton's 3rd law. For every action there is an equal or opposite reaction.
300
Its a one story house. The floor is green the walls are blue and the front door is yellow. What color are the stairs?
Its a one story house there are no stairs.
400
What is the safest way to cut a curve on a scroll saw?
Use relief cuts!!!
400
Simplify 12/16
3/4
400
Name three types of screw heads.
Square, Philips, Flat, Star, Allen, Torques
400
What is the resistance of air that acts on a rocket called?
Drag
400
How do you determine width from length on a board?
Across the grain is your width and with the grain determines your length.
500
Which direction does the drill bit spin? And why is this important to the position of your material.
Clock wise. You always have your extra material sticking out to the left side of the table so if there is a catch it will hit the post of the drill press not you.
500
Convert 7/8ths to 16ths
14/16ths
500
What do the numbers on sandpaper mean?
The higher the number the finer the grit of sand paper
500
Explain or illustrate how a rocket works
The burning of fuel creates hot expanding gas which escapes through the exhaust nozzle. This action creates a reaction called thrust.
500
If 7 11 is open 24 hours a day 7 days a week 365 days a year then why do they have locks on the doors?
If there is a crime they need to be able to secure the crime scene.