Attitude
Clothing and Protective Equipment
Before use of machines
During use of machines
Lab Maintenance
100
The safe way is _________ the best way.
What is always
100
Always wear proper _________ when working in the lab.
What is eye protection.
100
Don't use any equipment until the ________ has shown you how to use it and has given you permission.
What is teacher
100
Use the _________ tool for the job.
What is right
100
Keep the floor and aisles ________ at all times.
What is clean
200
Read and follow all posted __________.
What is Safety Rules
200
Never wear _________ or loose clothes in the lab.
What is Jewelry
200
Obtain the right tool for the job. The most important reason for using the right tool for the job is ________.
What is safety
200
Take your _________ when working with tools.
What is time
200
If a liquid is spilled, clean it up __________ as instructed by the teacher.
What is immediately
300
The number one cause of accidents is a poor _________.
What is attitudes
300
__________ should be tied back or worn under a cap to avoid getting it caught in the machinery.
What is Long Hair
300
Tell the teacher __________ if a machine doesn;t sound right, or if you can see that something is wrong.
What is immediately
300
Carry sharp or pointed tools with the point ________.
What is down.
300
Always use a (n) _________ to clean dry materials from a table or piece of equipment.
What is brush
400
Mistakes cause ___________.
What is accidents
400
You should wear ___________ or boots with rubber soles.
What is hard shoes
400
When a you ________ a machine, be sure it is off and that it is not coasting.
What is approach
400
Use machine __________ at all times to prevent injury.
What is guards.
400
When you finish using a machine, turn it off wait until it stops, and ________ the machine and the area around it.
What is clean
500
___________ will not be tolerated. This evidence of a poor safety attitude.
What is Horseplay.
500
Always wear ___________ at all times while working in the lab.
What is safety goggles
500
Be sure, blades, belts, and bits are ___________ properly before using.
What is installed
500
Never talk to a person while he/she is _________ a machine.
What is operating
500
Store all ________ properly.
What is materials
M
e
n
u