CATEGORY 1
CATEGORY 2
CATEGORY 3
CATEGORY 4
CATEGORY 5
100
What rope element is this?
Bight
100
The core of a kernmantle rope is made of high strength fibers which account for _____% of the total strength of the rope?
70-75%
100
After the cylinder has been removed, use a ______ to move the locking bolt to the open position?
Key tool
100
Which is one of the major lock categories?
Mortise locks
100
The duck billed lock breaker is specifically designed for?
padlocks
200
What rope element is this?
Round turn
200
What type of knot is this?
Figure 8 knot
200
One way to physcially force a lock is to pull the _____ out of the door using a, A tool or a K tool
Cylinder
200
Which tool is used on all lock cylinders?
K tool
200
The body of a ______ is surface mounted on the inside of the door?
rim lock
300
What is an advantage of synthetic kermantle rope?
Well suited for rescue work
300
When inspecting kernmantle rope, what findings should alert the firefighter?
Depressions of the kern
300
Recommended tool for breaking tempered glass?
Pick head axe
300
Which type of windows could potentially cause serious problems or ventilation efforts if broken?
Fixed/picture
300
Venting lexan glass should be done with
a rotary saw
400
Which rope is best suited for rescue rope?
Kernmantle
400
What is one item that would be included in a life safety ropes, record?
each time it was used
400
Power saws are available in basic types, the chain saw and the _____ are mechanical
rotary saw
400
The preffered method to open many commercial doors, residential security locks and high security doors?
Through the lock
400
which is considered a push pull tool?
pike pole
500
What is an advantage of synthetic rope over natural rope?
Lasts longer than natural fiber
500
Best way to clean natural fiber ropes?
Brush off dirt or foreign materials with a dry stiff broom or brush
500
Which is one of the 3 basic tools incorporated into a halliganan tool?
Adz end
500
The tool that is specifically designed to open double swinging doors equipped with panic bars is a....?
J tool
500
which is the preferred method in gaining entry to a structure
try before you pry