Basics
TGNR-Specific PPE
Risk & Hazard Assessments
General PPE
TGNR FRC
100

The word that is identified by the second "P" in PPE.

What is Protective?

100

This type of PPE can be used to protect eyes.

What is safety glasses, goggles or face shield?

100

The first step of trying to protect employees from hazards.

What is Elimination?

100

To protect oneself against falling objects this PPE should be worn.

What is a hard hat?

100

Standard type of foot protection we use daily.

What is steel toe boots?

200

This group is responsible for proper wear of PPE.

Who is all employees?

200

When working around loud equipment, these should be used.

What are earplugs?

200

The requirement for PPE can be identified by:

What is performing a risk assessment?

200

Form and discussion that will help identify job hazards and the PPE required.

What is a Job Safety Analysis (JSA)?

200

$250

What is the standard annual boot allowance? 

or

What is the standard annual prescription safety glasses allowance?

300

The first place to go with safety-related questions or concerns.

What is your Supervisor or an EHS Rep?

300

Coveralls, flame resistant clothing, lab coats, and rubber aprons are all examples of this PPE type.

What is body protection?

300

Provides you greater detail regarding the hazards of a chemical.

What is SDS (Safety Data Sheet)?

300

Dispose and replace it.

What do you do with PPE when it is damaged?

300

Eye protection, hearing protection, hand and foot protection, and flame-resistant clothing (FRC).

What is the basic required PPE on a typical day?

400

Acronym of government agency that regulates workplace safety.

What is OSHA? 

Occupational Safety and Health Administration

400

With this addition one is allowed to wear their prescription glasses.

What are side shields?

400

The sign that displays the Health, Flammability, Instability and Special Hazards of any chemical.

What is the NFPA Diamond or Hazard Diamond?

400

How often should you inspect PPE?

Daily and/or before each use.

400

This layer of clothing must be FRC.

What is the outermost layer?

500

When engineering, work practice and administrative controls are not feasible or do not provide sufficient protection, employers must provide ____ _____ _____.

What is personal protective equipment?

500

ANSI Z89 is the standard this piece of PPE should comply with.

What is hard hat?

500

The four colors in the NFPA diamond and what they each stand for.

What is RED = flammability, 

BLUE = health hazard, 

YELLOW = reactivity, and 

White = Special Hazards?

500

This is implemented when working at heights, but may be relevant when working near an edge, a pit or hole, or performing work on a steep surface.

What is fall protection PPE?

500

TGNR required what category of FRC, as a minimum?

Cat 2. Category rating of 2 will protect the wearer against an arc flash of 8.0 calories or less.

M
e
n
u