Wave Mechanics
This must be confirmed with one successful order before receiving any specimens.
What is analyzer connectivity?
This shared tool is used to track both dry and wet testing results and becomes the validation packet.
What is a tracker?
This action must be taken immediately when issues arise during testing.
What is notify team leads/manager?
This daily action ensures that all printouts are archived and shared with key team members.
What is sending the printouts using the fax machine?
This is the status color in Expanse that indicates a result has been auto-verified.
What is red?
This is the preferred form of evidence capture when analyzer printouts are unavailable.
What is a screenshot or photo?
This color in MEDITECH Expanse indicates a result has been held for manual review.
What is black?
This setting in MEDITECH Expanse must be set to NO during analyzer batch setup.
What is Complete Transmission Only?
This must be created in MEDITECH Expanse and only one is allowed per day.
What is an analyzer batch?
This must be completed before arriving onsite to ensure travel logistics are documented.
What is the Travel Tracker?
This chat space is used when the root cause of a testing issue is unknown.
What is the Internal Only chat?
This type of specimen must be tested with both negative and positive samples during wet testing.
This action must be taken before changing IP addresses, ports, or analyzer/LIS settings.
What is document current settings via photo or printouts?
This document must be referenced to identify lab label printer names per facility before testing begins.
What is the Expanse Printer Crosswalk?
This phrase should be placed on the analyzer to prevent staff from turning on the Magic interface during testing.
What is "Expanse Testing in Progress! Do NOT turn on MEDITECH Magic Interface!"
This session must be attended with the Team Lead prior to wet testing.
What is the wet testing prep session?
The Expanse Product Team must be notified after the first test to capture this.
What is the analyzer serial numbers?
This is when wet testing data should be entered into the tracker.
What is in real time?
This must be run again if analyzer settings were changed during testing.
What is QC in Magic?
This setting in MEDITECH Expanse must be used during analyzer testing, except for Blood Bank.
What is enhanced autofile?