These are the two main parameters found on a reverb.
What are reverb time (decay) and pre-delay?
This parameter sends the output of the delay back to the input of the delay.
This is the number of inserts that can be applied to a track in Pro Tools.
What is 10?
This automation mode begins writing automation as soon as you adjust the parameter and keeps writing even after you've let go.
What is the latch mode?
This is the sound of multiple simultaneous reflections inside of an acoustical space.
What is reverberation?
These are the two most important parameters of a delay.
What are delay time, and feedback?
Adjusting this changes the wet/dry mix when using an effects aux track.
What is the output volume of the aux track?
This track type controls the overall output of the entire mix and does not allow you to adjust panning within a mix.
What is a master fader?
Adjusting this parameter will affect how long the reverberating sound lasts.
What is reverb time (decay)?
Setting its value according to the tempo of a song is an example of configuring this parameter.
What is a delay time?
!! DAILY DOUBLE !!
______ route signal internally in Pro Tools while ______ route signal to an external source.
This tool will allow you to adjust an automation point.
What is the grabber tool?
What is pre-delay?
!! DAILY DOUBLE !!
This feature makes and controls the modulation in a delay.
This send configuration makes the send output level dependent on the track's output fader.
What is post-fader?
This is how dither works when exporting a 24-bit session down to a 16bit .wav file.
What is adding randomized noise to minimize digital artifacts?
This is the measurement of how long a sound takes to decay by 60 dB in a space.
What is RT60?
What is modulation?
This mode is best used for adjusting the volume output of a track only on the bridge section of a song.
What is touch mode?
Controlling various parameters, such as panning and mute, making edits across multiple tracks, and keeping relative levels between multiple tracks at a time are functions of these.
What are edit groups?