SRBRS 1
The PSC stack indicator for a SRBRS vest being connected for the first time.
What is blinking white light?
The size of the work area needed for a task that takes more than 3 minutes.
What is a 7x7 OOS Area?
The action that you need to take if you are experiencing a risk to personal safety.
What is e-stop the floor?
Attempt after soft reset.
What is hard reset?
The different possible colors when a drive detects a vest.
What is : white no active vest
orange slow signal
red stop signal
The approved entry points onto the AR floor.
What are access points?
Tool used to deliver a drive to the maintenance cage.
What is the drive pusher tool?
The number of fiducials that you can stray off of your Access Path.
What is 4?
Drive recognizes fiducial.
What is blinking fiducial indicator?
Entering the live AR floor without an access path/activated SRBRS vest.
What is promotion to customer?
The amount of active SRBRS vests allowed on one floor/zone?
What is 10?
A drive is involved in a head on collision with possible damage to the ODS sensors.
What is send to RME to check the sensors.
Inspect batteries, put batteries in modules, connect cords, power on, manage modules.
What is start of shift vest procedures?
Needing to physically move a single faulted drive without tools.
What is after soft or hard reset or e-stop is pressed on the DU?
The bypass and lifter override buttons are flashing and all 4 pod legs are on the floor.
What is releasing the lifter override button?
The things you check for with the Safety Double Check.
What is Solid Green LED & Active Access Path?
Reasons to press a drive unit e-stop.
What is when there is risk of damage to the drive caused by amnesty and when a drive unit is blocking your path and you cannot allow it to move or pass in any other way.
The different actions to Turn On, Activate, Deactivate, Turn Off your SRBRS Vest.
What is
Turn On: Blue 1 Second
Activate: Orange 1 Second
Deactivate: Orange 5 Seconds
Turn Off: Blue 8 Seconds
Things that happen before bypass mode is initiated.
What is:
back up while staying in your access path
create a new access path
push the e-stop button on the drive and move it out of your way.
Hang your green lock, keep your key and enter e-stopped floor.
What is floor blitz?
Activating your vest before entering the floor and deactivating your vest when leaving the floor.
What is the immediately before and after rule?
The buttons and lights on a drive.
What is: e-stop, power, lifter over ride, bypass, fiducial seen indicator, dusc, wifi, and srbrs vest indicator.
The process for deactivating a faulted vest.
What is : calmly leave the floor
clear the fault in MMA
out of service your modules in MMA
power off your vest
(if you e-stopped the floor call out that it was you)
Pod lowering procedure.
What is a 7x7 prohibit centered around the pod
confirm no over hanging product
soft reset
all indicator lights back
lifter override button pressed for 20 seconds all four pod legs on the ground with blinking fiducial and DUSC blinking
soft reset
The purpose of clearing a vest fault in MMA.
What is not triggering an e-stop when a minor vest fault occurs.