Signal Processors
An EQ processor allows users to adjust these this waveform characteristics.
What is frequency?
This is how attack and release are measured on a compressor.
What is milliseconds?
Recovering lost amplitude due to compression can be controlled by this parameter.
What is makeup gain?
This tool allows you to access the trim, selector, or grabber tool depending on where your cursors is on a clip.
What is the smart tool?
This is is the ratio between the loudest and the quietest parts of a signal.
What is dynamic range?
Sending the output of the delay back into the input of the delay increases the amount of repeats you heard and is controlled by this delay parameter.
This is the ratio in which a compressor turns into a limiter.
What is 10:1?
Controlling how quickly a compressors reacts after a signal passes the threshold is controlled by this parameter.
What is attack?
This reverb parameter determines the duration of the wash of reverberant energy.
What is reverb time (decay)?
Adjusting this EQ parameter will change the width of the affected frequency range.
What is the Q (bandwidth)?
!!DAILY DOUBLE!!
Delay time can be measured using either of these two time parameters.
This feature allows you to apply basic effects to individual clips, without affecting the rest of the clips on the timeline/track?
What are clip effects?
The average human ear can handle _____ decibles of dynamic range before feeling pain or discomfort.
What is 120dB?
This parameter on a reverb adjusts the gap in time between hearing the real sound and the onset of the reverb tail.
Fixed frequency points are a feature of this type of equalizer.
What is a graphic EQ?
When syncing multiple tracks together, this tool can be used to alternatively create or snap to a Sync Point.
What is the grabber tool?
Sound waves that have a slower push and pull (compression and rarefaction) create these types of pitches.
What are lower-pitches?
Both of these types of filters affect frequencies above or below a cutoff frequency. (name both)
What are shelving and low/high-pass filters?
Reverb decay (reverb time) is measured by the amount of time it takes for the reverb signal to decay by ____ decibles.
What is 60dB?
You can change the slope shape of a fade-in or fade-out, but not adjust the length of a fade in this window.
What is the Fades Dialog Box?