Locating
Abbreviations
Multiple choice
Locating plus
True or False
100
Transmitter and Receiver

What are the 2 main components of the Locator?

100
BET
What is the abbreviation for Between?
100

During the locating of a cable, which of the following is considered an Abnormal Operating Condition? The excavator is available for discussion, Unable to locate the cable, Excavation activities are not started yet, Maps are updated

What is unable to locate the cable?

100
The 5th step in our 9 steps to an accurate locate.
What is conducting a visual scan?
100

When you turn on the transmitter in the Ohms mode and your display reads 1 with a solid tone, you have good continuity, (a complete circuit); you should use 200k to locate the line.

What is False?
200
Active and Passive

What are the 2 types of locatable signals?

200
COR

What is the abbreviation for corner?

200
In conductive cable locating, where do you place the ground rod?  In dry, sandy soil if possible, As close to the transmitter as possible, As close to the pipe as possible, To one side and away from the pipe  

What is to one side and away from the pipe?

200

Each day, before the first locate.

What is checking the batteries?
200
Pink is the color used for surveying or property line marking.
What is true?
300

Method used when you direct connect the leads to a pipe or cable.

What is conductive or metal to metal?
300
DIR

What is the abbreviation for direction?

300

In the conductive method, where do you locate the transmitter in relation to the pipe? It doesn't matter as long as the unit is well grounded, As far from the pipe as possible, As close to the pipe as possible, Directly over the pipe

What is as far from the pipe as possible?

300

When painting, staking, or flagging a buried facility, you should always avoid.

What is indicating depth of the facility ?

300
The 7th step to an accurate locate is troubleshooting.
What is true?
400

The time 811 Dig requests tickets require.

What is 48 hours?
400
ESTS

What is the abbreviation for estates?

400

When do you use the low sensitivity (gain) setting on the receiver? When working close to the transmitter, When working far from the transmitter, When working directly over the pipe, When working alongside the pipe

What is when working close to the transmitter?

400

Vertical and perpendicular to the pipe.

What is the correct way to hold the receiver?
400

In inductive locating, the transmitter and receiver should be at least 30 feet from each other.

What is false?
500
The best conductor in locating.
What is copper?
500
ROW

What is the abbreviation for right of way?

500

What causes the "null" sound you hear when the pickup antenna is directly above the pipe? The signals entering both sides of the antennal cancel each other, The transmitter and receiver are too close to each other, The metal of the pipe absorbs the signal

What is the signals entering both sides of the antennal cancel each other?

500

The proper way to hold the receiver to triangulate pipe depth.

What is at a 45 degree angle?
500

5 seconds after a lighting strike is equal to 1 mile you are away from the storm.

What is true?
M
e
n
u