All Things Visionary
DAILY DOUBLE!!!
In order to render valid results, visual examination must include:
a. A trained operator
b. Procedure for conducting the test
c. Astandard for interpreting and reporting the results.
d. All of the above
d. All of the above
Laminations are likely found during THIS process of metal manufacturing.
What is Forging?
A weld inspector would expect to find a crater crack in what location(s) of a weld bead?
What is the beginning (start) and end of the weld bead?
Every inspector is affected differently by perception, fatigue, and attitude. In visual inspection, these factors are classified as
What is Physiological Factors?
In Accordance with ASNT, SNT-TC-1A, certification of VT personnel is the responsibility of:
Who is the Employer?
The very center and dark part of the eye.
(hint) Also a student......
What is a pupil?
DAILY DOUBLE!!
This category of Discontinuity originates in the casting of the original material.
What is an Inherent discontinuity?
Common trade Name for SMAW:
What is Stick Welding?
Typically the first Inspection process in an NDT part evaluation:
What is Visual Testing?
A device that raises, transfers, or pressurizes fluids......
What is a Pump?
380-770 nm on the electromagnetic spectrum:
What is the Visible Light Section?
Vibrations, Stress Risers and corrosion all may lead to this type of discontinuity.
What is a Service -induced (In-service) Discontinuity?
What does the acronym "VWAC" stand for?
What is Visual Weld Acceptance Criteria?
DAILY DOUBLE!!
THIS mechanical device is used to control flow.
What is a valve?
Considered by ASNT, NAS-410, NASA, President Trump and Professor Ballard to be the most boring lectures in all of NDT:
What is a Zak Milligan UT lecture?
The measurement system/chart used to evaluate and categorize the full range of light and energy wavelengths:
What is the Electromagnetic Spectrum?
Gas holes (porosity) and hot tears typically occur during this metal manufacturing process.
What is Casting?
In Welding, a metal protrusion beyond the fusion line at the toe of the weld, typically not well-bonded:
What is an overlap or cold lap?
A method used for copying the topography of a surface that cannot be moved or one that would be damaged in transferal:
What is Replication?
DAILY DOUBLE!!
one of the main properties (called color appearance parameters) of a color, defined technically (in the CIECAM02 model), as "the degree to which a stimulus can be described as similar to or different from stimuli that are described as red, green, blue, and yellow
What is Hue?
functions like the diaphragm of a camera, controlling the amount of light reaching the back of the eye by automatically adjusting the size of the pupil (aperture).
What is an Iris?
Cracks, suckback, undercut and overlap are discontinuities found in:
What are Weldments or Welds?
FCAW stands for:
What is Flux Cored Arc Welding?
Glare can be reduced on an inspection surface making it easier or more accurate to inspect:
What is polarized Light?
A device that provides the means for comparing a test surface to a standard surface finish is a:
What is a Surface Comparator?