Fall Protection
FLRA
Safety Hodge Podge
Procedures
Cold Stress Management
100
A worker's personal protective equipment that stops the worker's fall and does not allow to fall further.
What is "Fall Arrest Equipment"?
100
This is a systematic process conducted on a day-to-day, shift-to-shift basis, immediately prior to starting a job (and when a job changes) to identify and control hazards.
What is an FLRA?
100
This color of boundary ribbon denotes the hazard "Caution".
What is Yellow?
100
This is the number to call as part of the emergency procedures.
What is 780-828-3000?
100
This is the mildest form of a freezing cold injury. It occurs when ear lobe, noses, cheeks, fingers, or toes are exposed to the cold and the top layer of skin freezes.
What is frostnip?
200
These "points" shall be identified and installed at appropriate locations on vessels, towers, cokers, modules, etc., which will permit anchoring fall protection devices. These "points" to which a personal fall arrest system is attached must have an ultimate load capacity of at least 22.2kN (5000 lbs) per worker attached.
What is an Anchor Point?
200
These are the "individuals" who are responsible for carrying out the job activity and participate in the FLRA process.
Who are "All Crew Members"?
200
These are the 2 types of incidents we had recently and discussed?
What are "eye injuries"? and What are "Slips"?
200
These are the steps to be followed in the event of an emergency situation.
What is the Emergency Procedure For Evacuation?
200
Occurs when tissue temperature falls below freezing, or when blood flow is obstructed under cold conditions. The affected area turns white and may feel numb.
What is frostbite?
300
This is a flexible line of webbing or synthetic or wire rope that is used to secure a full body harness or safety belt to a lifeline or anchor point.
What is a Lanyard?
300
This assessment deals with the work that is to be completed that day, and focus on current conditions.
What is "Hazard Assessment"?
300
This sign is in blue and is lettered and is the predesignated safe area "I" to which the emergencies services personnel respond to obtain general incident information.
What is Emergency Meeting Point?
300
These procedures can be found in the field, the lunchroom and in the safety office.
What are safe work procedures?
300
Serious cold illness that occurs when the body is unable to compensate for its heat loss and the body's core temperature begins to fall.
What is hypothermia?
400
This is a device intended to reduce the force on a worker when personal fall arrest system is operating.
What is a Shock Absorber?
400
This is a condition or practice with the potential to cause harm to a person; damage to the environment or equipment; or production/business loss.
What is a Hazard?
400
This is a predesignated area safe location to which all personnel within a defined area will evacuate. These signs are numbered and red.
What is Emergency Assembly Area?
400
Some examples of this procedure are, " tools should be carried in tool pouches or tool bags cutting away from the body and not towards it, knives should have retractable blades, tools should be inspected prior to use, and use proper tool for the job.
What is the safe work procedure for Hand Tools?
400
DAILY DOUBLE!!! 1. Report to supervisor 2. Know the weather forecast, dress in layers, wear a hat or hood, take rain gear, pack a thermos, carry dry clothing in a plastic bag, wear wool 3. Use the buddy system in extreme conditions What kind of prevention is this?
What is Cold Stress Prevention?
500
This "system" (lifeline, shock absorbing lanyard, and safety harness) shall be used at a temporary or permanent work area if a worker may fall 3 meters (10 ft.) or there is an unusual possibility of injury if a worker falls less than 3 meters (10 ft.) into any substance or material, or onto any operating machinery.
What is a "Fall Protection System"?
500
DAILY DOUBLE!! These are the three basic steps when filling out a FLRA card at the job site.
What is "List Tasks", "List Hazards" and "Eliminate or Control Hazards"?
500
Safety head protection is designed to protect the head from impact from falling objects, bumps, and contact with energized objects and equipment. All head protection will meet or exceed these two requirements:
What is CSA Standard and ANSI Standard?
500
"Geet"
What is Bill Keating's favorite word?
500
According to CNRL "Heat and Cold Stress Management Program" this is the temperature that non-emergency work should cease with no noticeable wind.
What is -42 Celsius & below
M
e
n
u