Pushing Water
Make it Toasty! (Gas & Propane)
Filtration Nation!
Remove the dirt - cheaply!
Robots are taking over!
100

My pump is leaking from the motor casing - this tends to be the culprit.

What is a: Mechanical Seal Assembly?

100

This can be a result of a clogged filter, a pump issue and more, and it will directly prevent your heater from firing.

What is: Water Pressure?

100

Why does my cartridge filter look like a deep sea fish, pulled from its home to quickly?

What is: Plumbing your filter backwards?

100

My Zodiac Ranger will not move and it sounds like my pump is running loud.

This tends to be the culprit.

What is a: Diaphragm?

100

I tested this cleaner on my counter - its clearly broken......

What is: It needs to be in the water?

200

Is there a banshee in your pool shed? Why is your pump so loud?

What is a: Mechanical Seal Assm or Motor Bearings?

200

Toxic Gas!  Heaters should be installed (number of feet) away from an open window or door.

What is: 10 feet?

200

My sand filter has a pressure guage.  Its been running at 50PSI.

This first step needs to be done every month at least to help prevent this problem.

What is: Backwashing?

200

My suction cleaner seems to be pushed to one side of the pool.

This needs to change direction to prevent this from happening?

What is a: Return Jet?

200

My cable is twisted into knots - help!

What is: Stretch and sun bake for 24s hrs?

300

If your pump's acting lazy, overheating, or humming like it’s trying to sing the blues, you might want to check this electric parameter that keeps the motor spinning and the water winning.

What is: Voltage?

300

My garage is the perfect place for my heater.  Its attached to the house - easy to access, any my gas meter is on the other side of that outside wall.

What size heater do I need?

What is: None!  You cannot installed inside an attached residence dwelling.

300

Pressure gauges provide a glimpse into potential issues.

Generally they should be operating at this pressure range, to function optimally.

What is: 12-15 PSI

300

I have a 20x40 pool with a 0.25 HP pump.  Why wont my suction cleaner work?

What is an: Undersized Pump?

300

Trying to use you robot cleaner for Spring cleanup, can cause the wheels to slip creating an error code.

This tends to be the reason the wheels slip.

What is: Algae?

400

This whirly part of a pump is basically the Beyoncé of fluid flow—taking center stage to transfer energy to the liquid and keep things moving with serious centrifugal flair.

What is an: Impeller

400

When you heater is filled with small, blue tinged flakes and has most likely started leaking.  This tends to be the culprit.

What are: Phosphates?

400

My pump is running fine, but no water moves past my cartridge filter.  I can't seem to get a prime.

This items needs to be opened to provide some relief....

What is an: Air Relief Valve?

400

My Ranger continues to get stuck under my ladder.  If only I had something to prevent this from happening?

400

This P945 used to be blue - not now its white?

This is most likely the cause.

What is: Chlorine

500

When your pump starts sounding like it’s chewing gravel and your impeller's getting pitted like a bad avocado, this bubbly villain—caused by low pressure and high drama—might be to blame.

What is: Cavitation

500

My heater is going in my shed - I want to vent through the roof.  I have an Avia!

I need to use this!

What is a: AVIAHRK High-Rise Vent Kit - Avia

500

I filter & filter & filter - but this small cloudy grey debris will not go away....

What is wrong with my filter?

What is: Nothing!  Use a clarifier or enzyme to remove dead algae.

500

My cleaner is not moving - I connect the hose to the skimmer and then the cleaner, then toss it in the pool.

The pump gets loud and nothing happens.  Clearly this is not the issue and you just sell poopy cleaners.

What is: Air in the hose?

500

I am trying to complete my spring cleanup in the middle of March.  My pool does not have very much debris at all (its all just dirt, nothing large)  I am told I cannot use my robot cleaner for this?

Why?

What is: Temperature?

M
e
n
u