Number of steps in Overall Inspection Process
3
Air compressor governor should shut off at what 120PSI. True or False
True
Army Regulation covering safety
AR 385-10
Scanning the interior of the bus while driving is optional. True or False?
False
Dual Tires should touch each other for better traction and they can have up to one weld per rim/wheel. True or false.
False on both...nerds
3 processes used in Overall Inspection
Pretrip, During-trip, After-trip
The safety valve will open at _____ PSI
150PSI
Five parts of 49 CFR that cover drivers of Commercial Motor Vehicles (CMV).
383,384,390,391,392
Most bus accidents happen here.
Intersections
What to look for during electrical inspection
Crack, frayed, worn wires
Minimum tread depth on front tires of bus
4/32 inch
Low air pressure warning will activate if air falls below ___ PSI and turn off at ____PSI
60 PSI
Safety class taught drivers to avoid ___ and _____ while operating equipment
Drugs and Medication
Standing on the bus, while in motion, is acceptable when
If passengers are with the marked areas.
What 5 fluids should be check on a bus
1 oil
2 transmission
3 battery
4 Fuel/def
5 window washer fluid
Function of front brake limiting valve
Reduces chance of skidding on slippery surfaces.
Five components of the air tank
1 Air Compressor
2 Compressor governor
3 Storage tanks
4 Tank Drains
5 Alcohol Evaporator
DOT Regulation governing railroad crossing
49 CFR 392.10 (a)
Name of 24 hour cycle of alertness and sleep
Circadian Rhythm
color of SSG Hickey’s mustache
Red/brown
All GSA buses have brake-door interlocks. True or False
False
Inspection involving running vehicle between 600-900 RPM and watching pressure build from 50 to 90 PSI in UNDER 3 minutes.
Rate of air pressure build up
7 safe driving habits
1 inspection.
2 vehicle control.
3 situational awareness.
4 speed control.
5 hazard identification.
6 railroad crossing.
7 seatbelts.
Drivers are advised to visually look ____ while operating the bus
12-15 seconds ahead (1/4)
1SG Munsell’s middle name
Ellsworth