Tools
Finishing
Safety
Measurement
CATCH ALL
100
What tool is this?
Miter Saw or Chop Saw
100
True or False
60 grit sandpaper is smoother/less rough than 100 grit sandpaper.
False
100
True or False
It is allowable to start up a machine with the material in contact with the machine’s bit, blade, or disc.
False
100
Name 2 measurement tools
Tape measure
Ruler
Speed Square
Carpenters Square
100
Which image represents a rip cut?
Image B: Rip cuts go with the grain
Image A represents a cross cut, against the grain
200
What tool is this?:
Scroll Saw
200
True or False
After applying stain you should wipe off the excess with a rag.
True
200
On a router table or miter saw the workpiece should be in contact with which two parts?
The table and fence
200
What measurement is depicted by number 1?
6 inches
200
What must be removed before starting the drill press?
-Chuck
-Chuck Key
-Drill Bit
-Work Piece
The chuck key
300
What part of the drill holds the bit securely in place?
Chuck
300
Describe a three step sanding process.
Start with a lower number grit progressing to higher number grits.
80 grit
120 grit
220 grit
300
Name 3 safety considerations you should take before starting work in the shop.
-Tying back long hair
-Tucking in necklaces and drawstrings
-Securing baggy clothing
-Leaving distractions (like phones) in classroom
-Remove jewelry (bracelets, watches)
-Wearing safety glasses
300
What measurement is depicted by number 2?
6 ½ inches
300
What measurement is depicted by number 5?
5 - 7/16 inches
400
When replacing a blade on a scroll saw, the teeth should be pointing in which direction?
DOWN
400
Why should you let glue dry on your project prior to staining?
Glue will prevent the stain from absorbing into the wood. It will create uneven color or lighter blotches. It will block the stain.
400
Use a _____ to push stock past the blade when the space between the blade and the fence is 6” or less.
Push stick or push block
400
What measurement is depicted by number 3?
5 ¼ inches
400
True or False
The miter saw cursor should always be set at 10 degrees for straight cuts.
False
It should be set to 0 degrees
500
What part of a scroll saw prevents the workpiece from moving up and down when adjusted correctly?
Pressure Foot
500
What is the purpose of applying polyurethane (poly)?
Two purposes!
Used to coat surfaces making them:
Shiny/smooth
Protection from scratches
Helps resist water damage
500
What should you do with your workpiece prior to drilling into while using the drill press?
Clamp it onto the table. Preferably on a piece of scrap to protect the bit and table.
500
What measurement is depicted by number 4?
6 ⅞ inches
500
The router bit spins clockwise OR counter- clockwise when viewed from the top of the table.
Counter-Clockwise