Gluing and Clamping
Sanding
Painting
Operations
Safety
100
All dried glue should be ________ ______
What is scraped off.
100
Always sand with the _________ ___________.
What is the wood grain.
100

When opening a can of spray paint you must do what first?

Shake the can.

100
You must always wear ______ _______ while working in the shop
What is wear safety glasses.
100
When working on a machine or piece of equipment always _______________ and ___________________
What is turn off + unplug the machine
200
Boards that are clamped and glued together should be left alone for________
What is overnight.
200
When should 600 grit sand paper be used?
What is sanding between coats of final finish.
200

After oiling you have to _______ your dirty rags

What is dispose of your rags in the daily trash.

200

If you sand on the right side of the disc sander you will_____________

Cut your finger and the board will fly up.

200
If operating a machine and it does not sound right you should _______________ and _________________
What is turn off and inform the instructor immediately.
300

When gluing boards together the bottom surface of all of the board should be __________

What is flush.

300
You can determine the size of grit on sandpaper by__________
What is look at the back of sand paper for a number.
300

Glue marks will _____________ when the wood is painted if not removed.

What is show up.

300
If you are unsure of what to do next you should___________________
What is contact the instructor.
300

The big red button on the wall does what?

Shuts off power to the workshop

400

When clamping individual board into a solid panel. The bar clamps should be tightened with how much force?.

What is two fingers of pressure

400
The desired grit size to start sanding your wood is _________
What is 80 grit.
400

Varnish is applied with what tool __________________________.

Spray gun

400

When operating the bandsaw, you should do what first during your pre-operation check?

Lower the blade height as low as you can go.

400
When using the band saw you should never have your fingers________________
What is in front of the blade.
500

If you squeeze the bar clamps too tight you can________________________?

Get dents in the wood

500
The name of the abrasive particle on sand paper is called__________
What is grit.
500
Staining wood can change the _______ of wood
What is the color
500

What is Mr Cope's favourite tool

What is cope-ing saw?

500

You must be deemed what ________ to use a machine independently.

What is competent

M
e
n
u